IRB

IRB stands for “interactive Ruby” and is a tool to interactively execute Ruby expressions read from the standard input.

The irb command from your shell will start the interpreter.

Usage¶ ↑

Use of irb is easy if you know Ruby.

When executing irb, prompts are displayed as follows. Then, enter the Ruby expression. An input is executed when it is syntactically complete.

$ irb
irb(main):001:0> 1+2
#=> 3
irb(main):002:0> class Foo
irb(main):003:1>  def foo
irb(main):004:2>    print 1
irb(main):005:2>  end
irb(main):006:1> end
#=> nil

The singleline editor module or multiline editor module can be used with irb. Use of multiline editor is default if it's installed.

Command line options¶ ↑

Usage:  irb.rb [options] [programfile] [arguments]
  -f                Suppress read of ~/.irbrc
  -d                Set $DEBUG to true (same as `ruby -d')
  -r load-module    Same as `ruby -r'
  -I path           Specify $LOAD_PATH directory
  -U                Same as `ruby -U`
  -E enc            Same as `ruby -E`
  -w                Same as `ruby -w`
  -W[level=2]       Same as `ruby -W`
  --inspect         Use `inspect' for output (default except for bc mode)
  --noinspect       Don't use inspect for output
  --multiline       Use multiline editor module
  --nomultiline     Don't use multiline editor module
  --singleline      Use singleline editor module
  --nosingleline    Don't use singleline editor module
  --colorize        Use colorization
  --nocolorize      Don't use colorization
  --prompt prompt-mode
  --prompt-mode prompt-mode
                    Switch prompt mode. Pre-defined prompt modes are
                    `default', `simple', `xmp' and `inf-ruby'
  --inf-ruby-mode   Use prompt appropriate for inf-ruby-mode on emacs.
                    Suppresses --multiline and --singleline.
  --simple-prompt   Simple prompt mode
  --noprompt        No prompt mode
  --tracer          Display trace for each execution of commands.
  --back-trace-limit n
                    Display backtrace top n and tail n. The default
                    value is 16.
  -v, --version     Print the version of irb

Configuration¶ ↑

IRB reads from ~/.irbrc when it's invoked.

If ~/.irbrc doesn't exist, irb will try to read in the following order:

• .irbrc

• irb.rc

• _irbrc

• $irbrc

The following are alternatives to the command line options. To use them type as follows in an irb session:

IRB.conf[:IRB_NAME]="irb"
IRB.conf[:INSPECT_MODE]=nil
IRB.conf[:IRB_RC] = nil
IRB.conf[:BACK_TRACE_LIMIT]=16
IRB.conf[:USE_LOADER] = false
IRB.conf[:USE_MULTILINE] = nil
IRB.conf[:USE_SINGLELINE] = nil
IRB.conf[:USE_COLORIZE] = true
IRB.conf[:USE_TRACER] = false
IRB.conf[:IGNORE_SIGINT] = true
IRB.conf[:IGNORE_EOF] = false
IRB.conf[:PROMPT_MODE] = :DEFAULT
IRB.conf[:PROMPT] = {...}

Auto indentation¶ ↑

To disable auto-indent mode in irb, add the following to your .irbrc:

IRB.conf[:AUTO_INDENT] = false

Autocompletion¶ ↑

To enable autocompletion for irb, add the following to your .irbrc:

require 'irb/completion'

History¶ ↑

By default, irb will store the last 1000 commands you used in IRB.conf[:HISTORY_FILE] (~/.irb_history by default).

If you want to disable history, add the following to your .irbrc:

IRB.conf[:SAVE_HISTORY] = nil

See IRB::Context#save_history= for more information.

The history of results of commands evaluated is not stored by default, but can be turned on to be stored with this .irbrc setting:

IRB.conf[:EVAL_HISTORY] = <number>

See IRB::Context#eval_history= and History class. The history of command results is not permanently saved in any file.

Customizing the IRB Prompt¶ ↑

In order to customize the prompt, you can change the following Hash:

IRB.conf[:PROMPT]

This example can be used in your .irbrc

IRB.conf[:PROMPT][:MY_PROMPT] = { # name of prompt mode
  :AUTO_INDENT => false,          # disables auto-indent mode
  :PROMPT_I =>  ">> ",            # simple prompt
  :PROMPT_S => nil,               # prompt for continuated strings
  :PROMPT_C => nil,               # prompt for continuated statement
  :RETURN => "    ==>%s\n"        # format to return value
}

IRB.conf[:PROMPT_MODE] = :MY_PROMPT

Or, invoke irb with the above prompt mode by:

irb --prompt my-prompt

Constants PROMPT_I, PROMPT_S and PROMPT_C specify the format. In the prompt specification, some special strings are available:

%N    # command name which is running
%m    # to_s of main object (self)
%M    # inspect of main object (self)
%l    # type of string(", ', /, ]), `]' is inner %w[...]
%NNi  # indent level. NN is digits and means as same as printf("%NNd").
      # It can be omitted
%NNn  # line number.
%%    # %

For instance, the default prompt mode is defined as follows:

IRB.conf[:PROMPT_MODE][:DEFAULT] = {
  :PROMPT_I => "%N(%m):%03n:%i> ",
  :PROMPT_N => "%N(%m):%03n:%i> ",
  :PROMPT_S => "%N(%m):%03n:%i%l ",
  :PROMPT_C => "%N(%m):%03n:%i* ",
  :RETURN => "%s\n" # used to printf
}

irb comes with a number of available modes:

# :NULL:
#   :PROMPT_I:
#   :PROMPT_N:
#   :PROMPT_S:
#   :PROMPT_C:
#   :RETURN: |
#     %s
# :DEFAULT:
#   :PROMPT_I: ! '%N(%m):%03n:%i> '
#   :PROMPT_N: ! '%N(%m):%03n:%i> '
#   :PROMPT_S: ! '%N(%m):%03n:%i%l '
#   :PROMPT_C: ! '%N(%m):%03n:%i* '
#   :RETURN: |
#     => %s
# :CLASSIC:
#   :PROMPT_I: ! '%N(%m):%03n:%i> '
#   :PROMPT_N: ! '%N(%m):%03n:%i> '
#   :PROMPT_S: ! '%N(%m):%03n:%i%l '
#   :PROMPT_C: ! '%N(%m):%03n:%i* '
#   :RETURN: |
#     %s
# :SIMPLE:
#   :PROMPT_I: ! '>> '
#   :PROMPT_N: ! '>> '
#   :PROMPT_S:
#   :PROMPT_C: ! '?> '
#   :RETURN: |
#     => %s
# :INF_RUBY:
#   :PROMPT_I: ! '%N(%m):%03n:%i> '
#   :PROMPT_N:
#   :PROMPT_S:
#   :PROMPT_C:
#   :RETURN: |
#     %s
#   :AUTO_INDENT: true
# :XMP:
#   :PROMPT_I:
#   :PROMPT_N:
#   :PROMPT_S:
#   :PROMPT_C:
#   :RETURN: |2
#         ==>%s

Restrictions¶ ↑

Because irb evaluates input immediately after it is syntactically complete, the results may be slightly different than directly using Ruby.

IRB Sessions¶ ↑

IRB has a special feature, that allows you to manage many sessions at once.

You can create new sessions with Irb.irb, and get a list of current sessions with the jobs command in the prompt.

Commands¶ ↑

JobManager provides commands to handle the current sessions:

jobs    # List of current sessions
fg      # Switches to the session of the given number
kill    # Kills the session with the given number

The exit command, or ::irb_exit, will quit the current session and call any exit hooks with IRB.irb_at_exit.

A few commands for loading files within the session are also available:

source

Loads a given file in the current session and displays the source lines, see IrbLoader#source_file

irb_load

Loads the given file similarly to Kernel#load, see IrbLoader#irb_load

irb_require

Loads the given file similarly to Kernel#require

Configuration¶ ↑

The command line options, or IRB.conf, specify the default behavior of Irb.irb.

On the other hand, each conf in IRB is used to individually configure IRB.irb.

If a proc is set for IRB.conf, its will be invoked after execution of that proc with the context of the current session as its argument. Each session can be configured using this mechanism.

Session variables¶ ↑

There are a few variables in every Irb session that can come in handy:

_

The value command executed, as a local variable

__

The history of evaluated commands. Available only if IRB.conf[:EVAL_HISTORY] is not nil (which is the default). See also IRB::Context#eval_history= and IRB::History.

__[line_no]

Returns the evaluation value at the given line number, line_no. If line_no is a negative, the return value line_no many lines before the most recent return value.

Example using IRB Sessions¶ ↑

# invoke a new session
irb(main):001:0> irb
# list open sessions
irb.1(main):001:0> jobs
  #0->irb on main (#<Thread:0x400fb7e4> : stop)
  #1->irb#1 on main (#<Thread:0x40125d64> : running)

# change the active session
irb.1(main):002:0> fg 0
# define class Foo in top-level session
irb(main):002:0> class Foo;end
# invoke a new session with the context of Foo
irb(main):003:0> irb Foo
# define Foo#foo
irb.2(Foo):001:0> def foo
irb.2(Foo):002:1>   print 1
irb.2(Foo):003:1> end

# change the active session
irb.2(Foo):004:0> fg 0
# list open sessions
irb(main):004:0> jobs
  #0->irb on main (#<Thread:0x400fb7e4> : running)
  #1->irb#1 on main (#<Thread:0x40125d64> : stop)
  #2->irb#2 on Foo (#<Thread:0x4011d54c> : stop)
# check if Foo#foo is available
irb(main):005:0> Foo.instance_methods #=> [:foo, ...]

# change the active session
irb(main):006:0> fg 2
# define Foo#bar in the context of Foo
irb.2(Foo):005:0> def bar
irb.2(Foo):006:1>  print "bar"
irb.2(Foo):007:1> end
irb.2(Foo):010:0>  Foo.instance_methods #=> [:bar, :foo, ...]

# change the active session
irb.2(Foo):011:0> fg 0
irb(main):007:0> f = Foo.new  #=> #<Foo:0x4010af3c>
# invoke a new session with the context of f (instance of Foo)
irb(main):008:0> irb f
# list open sessions
irb.3(<Foo:0x4010af3c>):001:0> jobs
  #0->irb on main (#<Thread:0x400fb7e4> : stop)
  #1->irb#1 on main (#<Thread:0x40125d64> : stop)
  #2->irb#2 on Foo (#<Thread:0x4011d54c> : stop)
  #3->irb#3 on #<Foo:0x4010af3c> (#<Thread:0x4010a1e0> : running)
# evaluate f.foo
irb.3(<Foo:0x4010af3c>):002:0> foo #=> 1 => nil
# evaluate f.bar
irb.3(<Foo:0x4010af3c>):003:0> bar #=> bar => nil
# kill jobs 1, 2, and 3
irb.3(<Foo:0x4010af3c>):004:0> kill 1, 2, 3
# list open sessions, should only include main session
irb(main):009:0> jobs
  #0->irb on main (#<Thread:0x400fb7e4> : running)
# quit irb
irb(main):010:0> exit

frame.rb -
    $Release Version: 0.9$
    $Revision$
    by Keiju ISHITSUKA(Nihon Rational Software Co.,Ltd)

–

output-method.rb - output methods used by irb
    $Release Version: 0.9.6$
    $Revision$
    by Keiju ISHITSUKA(keiju@ruby-lang.org)

–

DO NOT WRITE ANY MAGIC COMMENT HERE.