In Files

  • net/pop.rb

Net

Constants

APOPSession

This class is equivalent to POP3, except that it uses APOP authentication.

POP

Net::POP3 ↑

What is This Library? ↑

This library provides functionality for retrieving email via POP3, the Post Office Protocol version 3. For details of POP3, see [RFC1939] (www.ietf.org/rfc/rfc1939.txt).

Examples ↑

Retrieving Messages ↑

This example retrieves messages from the server and deletes them on the server.

Messages are written to files named 'inbox/1', 'inbox/2', .… Replace 'pop.example.com' with your POP3 server address, and 'YourAccount' and 'YourPassword' with the appropriate account details.

require 'net/pop'

pop = Net::POP3.new('pop.example.com')
pop.start('YourAccount', 'YourPassword')             # (1)
if pop.mails.empty?
  puts 'No mail.'
else
  i = 0
  pop.each_mail do |m|   # or "pop.mails.each ..."   # (2)
    File.open("inbox/#{i}", 'w') do |f|
      f.write m.pop
    end
    m.delete
    i += 1
  end
  puts "#{pop.mails.size} mails popped."
end
pop.finish                                           # (3)

  1. Call Net::POP3#start and start POP session.

  2. Access messages by using Net::POP3#each_mail and/or Net::POP3#mails.

  3. Close POP session by calling Net::POP3#finish or use the block form of start.

Shortened Code ↑

The example above is very verbose. You can shorten the code by using some utility methods. First, the block form of Net::POP3.start can be used instead of Net::POP3.new, Net::POP3#start and Net::POP3#finish.

require 'net/pop'

Net::POP3.start('pop.example.com', 110,
                'YourAccount', 'YourPassword') do |pop|
  if pop.mails.empty?
    puts 'No mail.'
  else
    i = 0
    pop.each_mail do |m|   # or "pop.mails.each ..."
      File.open("inbox/#{i}", 'w') do |f|
        f.write m.pop
      end
      m.delete
      i += 1
    end
    puts "#{pop.mails.size} mails popped."
  end
end

Net::POP3#delete_all is an alternative for each_mail and delete.

require 'net/pop'

Net::POP3.start('pop.example.com', 110,
                'YourAccount', 'YourPassword') do |pop|
  if pop.mails.empty?
    puts 'No mail.'
  else
    i = 1
    pop.delete_all do |m|
      File.open("inbox/#{i}", 'w') do |f|
        f.write m.pop
      end
      i += 1
    end
  end
end

And here is an even shorter example.

require 'net/pop'

i = 0
Net::POP3.delete_all('pop.example.com', 110,
                     'YourAccount', 'YourPassword') do |m|
  File.open("inbox/#{i}", 'w') do |f|
    f.write m.pop
  end
  i += 1
end

Memory Space Issues ↑

All the examples above get each message as one big string. This example avoids this.

require 'net/pop'

i = 1
Net::POP3.delete_all('pop.example.com', 110,
                     'YourAccount', 'YourPassword') do |m|
  File.open("inbox/#{i}", 'w') do |f|
    m.pop do |chunk|    # get a message little by little.
      f.write chunk
    end
    i += 1
  end
end

Using APOP ↑

The net/pop library supports APOP authentication. To use APOP, use the Net::APOP class instead of the Net::POP3 class. You can use the utility method, Net::POP3.APOP(). For example:

require 'net/pop'

# Use APOP authentication if $isapop == true
pop = Net::POP3.APOP($is_apop).new('apop.example.com', 110)
pop.start(YourAccount', 'YourPassword') do |pop|
  # Rest of the code is the same.
end

Fetch Only Selected Mail Using 'UIDL' POP Command ↑

If your POP server provides UIDL functionality, you can grab only selected mails from the POP server. e.g.

def need_pop?( id )
  # determine if we need pop this mail...
end

Net::POP3.start('pop.example.com', 110,
                'Your account', 'Your password') do |pop|
  pop.mails.select { |m| need_pop?(m.unique_id) }.each do |m|
    do_something(m.pop)
  end
end

The Net::POPMail#unique_id method returns the unique-id of the message as a String. Normally the unique-id is a hash of the message.

POP3Session

Net::POP3 ↑

What is This Library? ↑

This library provides functionality for retrieving email via POP3, the Post Office Protocol version 3. For details of POP3, see [RFC1939] (www.ietf.org/rfc/rfc1939.txt).

Examples ↑

Retrieving Messages ↑

This example retrieves messages from the server and deletes them on the server.

Messages are written to files named 'inbox/1', 'inbox/2', .… Replace 'pop.example.com' with your POP3 server address, and 'YourAccount' and 'YourPassword' with the appropriate account details.

require 'net/pop'

pop = Net::POP3.new('pop.example.com')
pop.start('YourAccount', 'YourPassword')             # (1)
if pop.mails.empty?
  puts 'No mail.'
else
  i = 0
  pop.each_mail do |m|   # or "pop.mails.each ..."   # (2)
    File.open("inbox/#{i}", 'w') do |f|
      f.write m.pop
    end
    m.delete
    i += 1
  end
  puts "#{pop.mails.size} mails popped."
end
pop.finish                                           # (3)

  1. Call Net::POP3#start and start POP session.

  2. Access messages by using Net::POP3#each_mail and/or Net::POP3#mails.

  3. Close POP session by calling Net::POP3#finish or use the block form of start.

Shortened Code ↑

The example above is very verbose. You can shorten the code by using some utility methods. First, the block form of Net::POP3.start can be used instead of Net::POP3.new, Net::POP3#start and Net::POP3#finish.

require 'net/pop'

Net::POP3.start('pop.example.com', 110,
                'YourAccount', 'YourPassword') do |pop|
  if pop.mails.empty?
    puts 'No mail.'
  else
    i = 0
    pop.each_mail do |m|   # or "pop.mails.each ..."
      File.open("inbox/#{i}", 'w') do |f|
        f.write m.pop
      end
      m.delete
      i += 1
    end
    puts "#{pop.mails.size} mails popped."
  end
end

Net::POP3#delete_all is an alternative for each_mail and delete.

require 'net/pop'

Net::POP3.start('pop.example.com', 110,
                'YourAccount', 'YourPassword') do |pop|
  if pop.mails.empty?
    puts 'No mail.'
  else
    i = 1
    pop.delete_all do |m|
      File.open("inbox/#{i}", 'w') do |f|
        f.write m.pop
      end
      i += 1
    end
  end
end

And here is an even shorter example.

require 'net/pop'

i = 0
Net::POP3.delete_all('pop.example.com', 110,
                     'YourAccount', 'YourPassword') do |m|
  File.open("inbox/#{i}", 'w') do |f|
    f.write m.pop
  end
  i += 1
end

Memory Space Issues ↑

All the examples above get each message as one big string. This example avoids this.

require 'net/pop'

i = 1
Net::POP3.delete_all('pop.example.com', 110,
                     'YourAccount', 'YourPassword') do |m|
  File.open("inbox/#{i}", 'w') do |f|
    m.pop do |chunk|    # get a message little by little.
      f.write chunk
    end
    i += 1
  end
end

Using APOP ↑

The net/pop library supports APOP authentication. To use APOP, use the Net::APOP class instead of the Net::POP3 class. You can use the utility method, Net::POP3.APOP(). For example:

require 'net/pop'

# Use APOP authentication if $isapop == true
pop = Net::POP3.APOP($is_apop).new('apop.example.com', 110)
pop.start(YourAccount', 'YourPassword') do |pop|
  # Rest of the code is the same.
end

Fetch Only Selected Mail Using 'UIDL' POP Command ↑

If your POP server provides UIDL functionality, you can grab only selected mails from the POP server. e.g.

def need_pop?( id )
  # determine if we need pop this mail...
end

Net::POP3.start('pop.example.com', 110,
                'Your account', 'Your password') do |pop|
  pop.mails.select { |m| need_pop?(m.unique_id) }.each do |m|
    do_something(m.pop)
  end
end

The Net::POPMail#unique_id method returns the unique-id of the message as a String. Normally the unique-id is a hash of the message.

POPSession

Net::POP3 ↑

What is This Library? ↑

This library provides functionality for retrieving email via POP3, the Post Office Protocol version 3. For details of POP3, see [RFC1939] (www.ietf.org/rfc/rfc1939.txt).

Examples ↑

Retrieving Messages ↑

This example retrieves messages from the server and deletes them on the server.

Messages are written to files named 'inbox/1', 'inbox/2', .… Replace 'pop.example.com' with your POP3 server address, and 'YourAccount' and 'YourPassword' with the appropriate account details.

require 'net/pop'

pop = Net::POP3.new('pop.example.com')
pop.start('YourAccount', 'YourPassword')             # (1)
if pop.mails.empty?
  puts 'No mail.'
else
  i = 0
  pop.each_mail do |m|   # or "pop.mails.each ..."   # (2)
    File.open("inbox/#{i}", 'w') do |f|
      f.write m.pop
    end
    m.delete
    i += 1
  end
  puts "#{pop.mails.size} mails popped."
end
pop.finish                                           # (3)

  1. Call Net::POP3#start and start POP session.

  2. Access messages by using Net::POP3#each_mail and/or Net::POP3#mails.

  3. Close POP session by calling Net::POP3#finish or use the block form of start.

Shortened Code ↑

The example above is very verbose. You can shorten the code by using some utility methods. First, the block form of Net::POP3.start can be used instead of Net::POP3.new, Net::POP3#start and Net::POP3#finish.

require 'net/pop'

Net::POP3.start('pop.example.com', 110,
                'YourAccount', 'YourPassword') do |pop|
  if pop.mails.empty?
    puts 'No mail.'
  else
    i = 0
    pop.each_mail do |m|   # or "pop.mails.each ..."
      File.open("inbox/#{i}", 'w') do |f|
        f.write m.pop
      end
      m.delete
      i += 1
    end
    puts "#{pop.mails.size} mails popped."
  end
end

Net::POP3#delete_all is an alternative for each_mail and delete.

require 'net/pop'

Net::POP3.start('pop.example.com', 110,
                'YourAccount', 'YourPassword') do |pop|
  if pop.mails.empty?
    puts 'No mail.'
  else
    i = 1
    pop.delete_all do |m|
      File.open("inbox/#{i}", 'w') do |f|
        f.write m.pop
      end
      i += 1
    end
  end
end

And here is an even shorter example.

require 'net/pop'

i = 0
Net::POP3.delete_all('pop.example.com', 110,
                     'YourAccount', 'YourPassword') do |m|
  File.open("inbox/#{i}", 'w') do |f|
    f.write m.pop
  end
  i += 1
end

Memory Space Issues ↑

All the examples above get each message as one big string. This example avoids this.

require 'net/pop'

i = 1
Net::POP3.delete_all('pop.example.com', 110,
                     'YourAccount', 'YourPassword') do |m|
  File.open("inbox/#{i}", 'w') do |f|
    m.pop do |chunk|    # get a message little by little.
      f.write chunk
    end
    i += 1
  end
end

Using APOP ↑

The net/pop library supports APOP authentication. To use APOP, use the Net::APOP class instead of the Net::POP3 class. You can use the utility method, Net::POP3.APOP(). For example:

require 'net/pop'

# Use APOP authentication if $isapop == true
pop = Net::POP3.APOP($is_apop).new('apop.example.com', 110)
pop.start(YourAccount', 'YourPassword') do |pop|
  # Rest of the code is the same.
end

Fetch Only Selected Mail Using 'UIDL' POP Command ↑

If your POP server provides UIDL functionality, you can grab only selected mails from the POP server. e.g.

def need_pop?( id )
  # determine if we need pop this mail...
end

Net::POP3.start('pop.example.com', 110,
                'Your account', 'Your password') do |pop|
  pop.mails.select { |m| need_pop?(m.unique_id) }.each do |m|
    do_something(m.pop)
  end
end

The Net::POPMail#unique_id method returns the unique-id of the message as a String. Normally the unique-id is a hash of the message.