Fiber

Returns false if the current fiber is non-blocking. Fiber is non-blocking if it was created via passing blocking: false to ::new, or via ::schedule.

If the current Fiber is blocking, the method, unlike usual predicate methods, returns a number of blocking fibers currently running (TBD: always 1?).

Note, that even if the method returns false, Fiber behaves differently only if ::scheduler is set in the current thread.

See the “Non-blocking fibers” section in class docs for details.

 
               static VALUE
rb_f_fiber_blocking_p(VALUE klass)
{
    rb_thread_t *thread = GET_THREAD();
    unsigned blocking = thread->blocking;

    if (blocking == 0)
        return Qfalse;

    return INT2NUM(blocking);
}
            

Returns the current fiber. You need to require 'fiber' before using this method. If you are not running in the context of a fiber this method will return the root fiber.

 
               static VALUE
rb_fiber_s_current(VALUE klass)
{
    return rb_fiber_current();
}
            

Creates new Fiber. Initially, fiber is not running, but can be resumed with resume. Arguments to the first resume call would be passed to the block:

f = Fiber.new do |initial|
   current = initial
   loop do
     puts "current: #{current.inspect}"
     current = Fiber.yield
   end
end
f.resume(100)     # prints: current: 100
f.resume(1, 2, 3) # prints: current: [1, 2, 3]
f.resume          # prints: current: nil
# ... and so on ...

if blocking: false is passed to the Fiber.new, and current thread has ::scheduler defined, the Fiber becomes non-blocking (see “Non-blocking fibers” section in class docs).

 
               static VALUE
rb_fiber_initialize(int argc, VALUE* argv, VALUE self)
{
    return rb_fiber_initialize_kw(argc, argv, self, rb_keyword_given_p());
}
            

The method is expected to immediately run the provided block of code in a separate non-blocking fiber.

puts "Go to sleep!"

Fiber.set_scheduler(MyScheduler.new)

Fiber.schedule do
  puts "Going to sleep"
  sleep(1)
  puts "I slept well"
end

puts "Wakey-wakey, sleepyhead"

Assuming MyScheduler is properly implemented, this program will produce:

Go to sleep!
Going to sleep
Wakey-wakey, sleepyhead
...1 sec pause here...
I slept well

…e.g. on the first blocking operation inside the Fiber (sleep(1)), the control is yielded at the outside code (main fiber), and at the end of the execution, the scheduler takes care of properly resuming all the blocked fibers.

Note that the behavior described above is how the method is expected to behave, actual behavior is up to the current scheduler's implementation of Fiber::SchedulerInterface#fiber method. Ruby doesn't enforce this method to behave in any particular way.

If the scheduler is not set, the method raises RuntimeError (No scheduler is available!).

 
               static VALUE
rb_f_fiber(int argc, VALUE *argv, VALUE obj)
{
    return rb_f_fiber_kw(argc, argv, rb_keyword_given_p());
}
            

Fiber scheduler, set in the current thread with ::set_scheduler. If the scheduler is nil (which is the default), non-blocking fibers behavior is the same as blocking. (see “Non-blocking fibers” section in class docs for details about the scheduler concept).

 
               static VALUE
rb_fiber_scheduler(VALUE klass)
{
    return rb_scheduler_get();
}
            

Sets Fiber scheduler for the current thread. If the scheduler is set, non-blocking fibers (created by ::new with blocking: false, or by ::schedule) call that scheduler's hook methods on potentially blocking operations, and the current thread will call scheduler's close method on finalization (allowing the scheduler to properly manage all non-finished fibers).

scheduler can be an object of any class corresponding to Fiber::SchedulerInterface. Its implementation is up to the user.

See also the “Non-blocking fibers” section in class docs.

 
               static VALUE
rb_fiber_set_scheduler(VALUE klass, VALUE scheduler)
{
    // if (rb_scheduler_get() != Qnil) {
    //     rb_raise(rb_eFiberError, "Scheduler is already defined!");
    // }

    return rb_scheduler_set(scheduler);
}
            

Yields control back to the context that resumed the fiber, passing along any arguments that were passed to it. The fiber will resume processing at this point when resume is called next. Any arguments passed to the next resume will be the value that this ::yield expression evaluates to.

 
               static VALUE
rb_fiber_s_yield(int argc, VALUE *argv, VALUE klass)
{
    return rb_fiber_yield_kw(argc, argv, rb_keyword_given_p());
}
            

Returns true if the fiber can still be resumed (or transferred to). After finishing execution of the fiber block this method will always return false. You need to require 'fiber' before using this method.

 
               VALUE
rb_fiber_alive_p(VALUE fiber_value)
{
    return FIBER_TERMINATED_P(fiber_ptr(fiber_value)) ? Qfalse : Qtrue;
}
            

Returns the current execution stack of the fiber. start, count and end allow to select only parts of the backtrace.

def level3
  Fiber.yield
end

def level2
  level3
end

def level1
  level2
end

f = Fiber.new { level1 }

# It is empty before the fiber started
f.backtrace
#=> []

f.resume

f.backtrace
#=> ["test.rb:2:in `yield'", "test.rb:2:in `level3'", "test.rb:6:in `level2'", "test.rb:10:in `level1'", "test.rb:13:in `block in <main>'"]
p f.backtrace(1) # start from the item 1
#=> ["test.rb:2:in `level3'", "test.rb:6:in `level2'", "test.rb:10:in `level1'", "test.rb:13:in `block in <main>'"]
p f.backtrace(2, 2) # start from item 2, take 2
#=> ["test.rb:6:in `level2'", "test.rb:10:in `level1'"]
p f.backtrace(1..3) # take items from 1 to 3
#=> ["test.rb:2:in `level3'", "test.rb:6:in `level2'", "test.rb:10:in `level1'"]

f.resume

# It is nil after the fiber is finished
f.backtrace
#=> nil

 
               static VALUE
rb_fiber_backtrace(int argc, VALUE *argv, VALUE fiber)
{
    return rb_vm_backtrace(argc, argv, &fiber_ptr(fiber)->cont.saved_ec);
}
            

Like backtrace, but returns each line of the execution stack as a Thread::Backtrace::Location. Accepts the same arguments as backtrace.

f = Fiber.new { Fiber.yield }
f.resume
loc = f.backtrace_locations.first
loc.label  #=> "yield"
loc.path   #=> "test.rb"
loc.lineno #=> 1

 
               static VALUE
rb_fiber_backtrace_locations(int argc, VALUE *argv, VALUE fiber)
{
    return rb_vm_backtrace_locations(argc, argv, &fiber_ptr(fiber)->cont.saved_ec);
}
            

Returns true if fiber is blocking and false otherwise. Fiber is non-blocking if it was created via passing blocking: false to ::new, or via ::schedule.

Note, that even if the method returns false, Fiber behaves differently only if ::scheduler is set in the current thread.

See the “Non-blocking fibers” section in class docs for details.

 
               VALUE
rb_fiber_blocking_p(VALUE fiber)
{
    return (fiber_ptr(fiber)->blocking == 0) ? Qfalse : Qtrue;
}
            

Raises an exception in the fiber at the point at which the last Fiber.yield was called. If the fiber has not been started or has already run to completion, raises FiberError. If the fiber is yielding, it is resumed. If it is transferring, it is transferred into. But if it is resuming, raises FiberError.

With no arguments, raises a RuntimeError. With a single String argument, raises a RuntimeError with the string as a message. Otherwise, the first parameter should be the name of an Exception class (or an object that returns an Exception object when sent an exception message). The optional second parameter sets the message associated with the exception, and the third parameter is an array of callback information. Exceptions are caught by the rescue clause of begin...end blocks.

 
               static VALUE
rb_fiber_raise(int argc, VALUE *argv, VALUE fiber_value)
{
    rb_fiber_t *fiber = fiber_ptr(fiber_value);
    VALUE exc = rb_make_exception(argc, argv);
    if (RTEST(fiber->resuming_fiber)) {
        rb_raise(rb_eFiberError, "attempt to raise a resuming fiber");
    }
    else if (FIBER_SUSPENDED_P(fiber) && !fiber->yielding) {
        return rb_fiber_transfer_kw(fiber_value, -1, &exc, RB_NO_KEYWORDS);
    }
    else {
        return rb_fiber_resume_kw(fiber_value, -1, &exc, RB_NO_KEYWORDS);
    }
}
            

Resumes the fiber from the point at which the last ::yield was called, or starts running it if it is the first call to resume. Arguments passed to resume will be the value of the ::yield expression or will be passed as block parameters to the fiber's block if this is the first resume.

Alternatively, when resume is called it evaluates to the arguments passed to the next ::yield statement inside the fiber's block or to the block value if it runs to completion without any ::yield

 
               static VALUE
rb_fiber_m_resume(int argc, VALUE *argv, VALUE fiber)
{
    return rb_fiber_resume_kw(fiber, argc, argv, rb_keyword_given_p());
}
            

Returns fiber information string.

 
               static VALUE
fiber_to_s(VALUE fiber_value)
{
    const rb_fiber_t *fiber = fiber_ptr(fiber_value);
    const rb_proc_t *proc;
    char status_info[0x20];

    if (RTEST(fiber->resuming_fiber)) {
        snprintf(status_info, 0x20, " (%s by resuming)", fiber_status_name(fiber->status));
    }
    else {
        snprintf(status_info, 0x20, " (%s)", fiber_status_name(fiber->status));
    }

    if (!rb_obj_is_proc(fiber->first_proc)) {
        VALUE str = rb_any_to_s(fiber_value);
        strlcat(status_info, ">", sizeof(status_info));
        rb_str_set_len(str, RSTRING_LEN(str)-1);
        rb_str_cat_cstr(str, status_info);
        return str;
    }
    GetProcPtr(fiber->first_proc, proc);
    return rb_block_to_s(fiber_value, &proc->block, status_info);
}
            

Transfer control to another fiber, resuming it from where it last stopped or starting it if it was not resumed before. The calling fiber will be suspended much like in a call to ::yield. You need to require 'fiber' before using this method.

The fiber which receives the transfer call is treats it much like a resume call. Arguments passed to transfer are treated like those passed to resume.

The two style of control passing to and from fiber (one is resume and ::yield, another is transfer to and from fiber) can't be freely mixed.

• If the Fiber's lifecycle had started with transfer, it will never be able to yield or be resumed control passing, only finish or transfer back. (It still can resume other fibers that are allowed to be resumed.)

• If the Fiber's lifecycle had started with resume, it can yield or transfer to another Fiber, but can receive control back only the way compatible with the way it was given away: if it had transferred, it only can be transferred back, and if it had yielded, it only can be resumed back. After that, it again can transfer or yield.

If those rules are broken FiberError is raised.

For an individual Fiber design, yield/resume is more easy to use style (the Fiber just gives away control, it doesn't need to think about who the control is given to), while transfer is more flexible for complex cases, allowing to build arbitrary graphs of Fibers dependent on each other.

Example:

require 'fiber'

manager = nil # For local var to be visible inside worker block

# This fiber would be started with transfer
# It can't yield, and can't be resumed
worker = Fiber.new { |work|
  puts "Worker: starts"
  puts "Worker: Performed #{work.inspect}, transferring back"
  # Fiber.yield     # this would raise FiberError: attempt to yield on a not resumed fiber
  # manager.resume  # this would raise FiberError: attempt to resume a resumed fiber (double resume)
  manager.transfer(work.capitalize)
}

# This fiber would be started with resume
# It can yield or transfer, and can be transferred
# back or resumed
manager = Fiber.new {
  puts "Manager: starts"
  puts "Manager: transferring 'something' to worker"
  result = worker.transfer('something')
  puts "Manager: worker returned #{result.inspect}"
  # worker.resume    # this would raise FiberError: attempt to resume a transferring fiber
  Fiber.yield        # this is OK, the fiber transferred from and to, now it can yield
  puts "Manager: finished"
}

puts "Starting the manager"
manager.resume
puts "Resuming the manager"
# manager.transfer  # this would raise FiberError: attempt to transfer to a yielding fiber
manager.resume

produces

Starting the manager
Manager: starts
Manager: transferring 'something' to worker
Worker: starts
Worker: Performed "something", transferring back
Manager: worker returned "Something"
Resuming the manager
Manager: finished

 
               static VALUE
rb_fiber_m_transfer(int argc, VALUE *argv, VALUE fiber_value)
{
    return rb_fiber_transfer_kw(fiber_value, argc, argv, rb_keyword_given_p());
}