Object

Receive only a specific message.

Instead of Ractor.receive, ::receive_if can provide a pattern by a block and you can choose the receiving message.

r = Ractor.new do
  p Ractor.receive_if{|msg| msg.match?(/foo/)} #=> "foo3"
  p Ractor.receive_if{|msg| msg.match?(/bar/)} #=> "bar1"
  p Ractor.receive_if{|msg| msg.match?(/baz/)} #=> "baz2"
end
r << "bar1"
r << "baz2"
r << "foo3"
r.take

This will output:

foo3
bar1
baz2

If the block returns a truthy value, the message will be removed from the incoming queue and returned. Otherwise, the messsage remains in the incoming queue and the following received messages are checked by the given block.

If there are no messages left in the incoming queue, the method will block until new messages arrive.

If the block is escaped by break/return/exception/throw, the message is removed from the incoming queue as if a truthy value had been returned.

r = Ractor.new do
  val = Ractor.receive_if{|msg| msg.is_a?(Array)}
  puts "Received successfully: #{val}"
end

r.send(1)
r.send('test')
wait
puts "2 non-matching sent, nothing received"
r.send([1, 2, 3])
wait

Prints:

2 non-matching sent, nothing received
Received successfully: [1, 2, 3]

Note that you can not call receive/receive_if in the given block recursively. It means that you should not do any tasks in the block.

Ractor.current << true
Ractor.receive_if{|msg| Ractor.receive}
#=> `receive': can not call receive/receive_if recursively (Ractor::Error)

 
               # File ractor.rb, line 493
def self.receive_if &b
  Primitive.ractor_receive_if b
end
            

Returns true if two objects do not match (using the =~ method), otherwise false.

 
               static VALUE
rb_obj_not_match(VALUE obj1, VALUE obj2)
{
    VALUE result = rb_funcall(obj1, id_match, 1, obj2);
    return RTEST(result) ? Qfalse : Qtrue;
}
            

Returns 0 if obj and other are the same object or obj == other, otherwise nil.

The #<=> is used by various methods to compare objects, for example Enumerable#sort, Enumerable#max etc.

Your implementation of #<=> should return one of the following values: -1, 0, 1 or nil. -1 means self is smaller than other. 0 means self is equal to other. 1 means self is bigger than other. Nil means the two values could not be compared.

When you define #<=>, you can include Comparable to gain the methods #<=, #<, #==, #>=, #> and between?.

 
               static VALUE
rb_obj_cmp(VALUE obj1, VALUE obj2)
{
    if (rb_equal(obj1, obj2))
        return INT2FIX(0);
    return Qnil;
}
            

Case Equality – For class Object, effectively the same as calling #==, but typically overridden by descendants to provide meaningful semantics in case statements.

 
               #define case_equal rb_equal
            

This method is deprecated.

This is not only useless but also troublesome because it may hide a type error.

 
               static VALUE
rb_obj_match(VALUE obj1, VALUE obj2)
{
    if (rb_warning_category_enabled_p(RB_WARN_CATEGORY_DEPRECATED)) {
        rb_category_warn(RB_WARN_CATEGORY_DEPRECATED, "deprecated Object#=~ is called on %"PRIsVALUE
                "; it always returns nil", rb_obj_class(obj1));
    }
    return Qnil;
}
            

Defines a singleton method in the receiver. The method parameter can be a Proc, a Method or an UnboundMethod object. If a block is specified, it is used as the method body. If a block or a method has parameters, they're used as method parameters.

class A
  class << self
    def class_name
      to_s
    end
  end
end
A.define_singleton_method(:who_am_i) do
  "I am: #{class_name}"
end
A.who_am_i   # ==> "I am: A"

guy = "Bob"
guy.define_singleton_method(:hello) { "#{self}: Hello there!" }
guy.hello    #=>  "Bob: Hello there!"

chris = "Chris"
chris.define_singleton_method(:greet) {|greeting| "#{greeting}, I'm Chris!" }
chris.greet("Hi") #=> "Hi, I'm Chris!"

 
               static VALUE
rb_obj_define_method(int argc, VALUE *argv, VALUE obj)
{
    VALUE klass = rb_singleton_class(obj);

    return rb_mod_define_method(argc, argv, klass);
}
            

Prints obj on the given port (default $>). Equivalent to:

def display(port=$>)
  port.write self
  nil
end

For example:

1.display
"cat".display
[ 4, 5, 6 ].display
puts

produces:

1cat[4, 5, 6]

 
               static VALUE
rb_obj_display(int argc, VALUE *argv, VALUE self)
{
    VALUE out;

    out = (!rb_check_arity(argc, 0, 1) ? rb_ractor_stdout() : argv[0]);
    rb_io_write(out, self);

    return Qnil;
}
            

Produces a shallow copy of obj—the instance variables of obj are copied, but not the objects they reference.

This method may have class-specific behavior. If so, that behavior will be documented under the #initialize_copy method of the class.

on dup vs clone¶ ↑

In general, clone and dup may have different semantics in descendant classes. While clone is used to duplicate an object, including its internal state, dup typically uses the class of the descendant object to create the new instance.

When using dup, any modules that the object has been extended with will not be copied.

class Klass
  attr_accessor :str
end

module Foo
  def foo; 'foo'; end
end

s1 = Klass.new #=> #<Klass:0x401b3a38>
s1.extend(Foo) #=> #<Klass:0x401b3a38>
s1.foo #=> "foo"

s2 = s1.clone #=> #<Klass:0x401be280>
s2.foo #=> "foo"

s3 = s1.dup #=> #<Klass:0x401c1084>
s3.foo #=> NoMethodError: undefined method `foo' for #<Klass:0x401c1084>

 
               VALUE
rb_obj_dup(VALUE obj)
{
    VALUE dup;

    if (special_object_p(obj)) {
        return obj;
    }
    dup = rb_obj_alloc(rb_obj_class(obj));
    init_copy(dup, obj);
    rb_funcall(dup, id_init_dup, 1, obj);

    return dup;
}
            

Creates a new Enumerator which will enumerate by calling method on obj, passing args if any. What was yielded by method becomes values of enumerator.

If a block is given, it will be used to calculate the size of the enumerator without the need to iterate it (see Enumerator#size).

Examples¶ ↑

str = "xyz"

enum = str.enum_for(:each_byte)
enum.each { |b| puts b }
# => 120
# => 121
# => 122

# protect an array from being modified by some_method
a = [1, 2, 3]
some_method(a.to_enum)

# String#split in block form is more memory-effective:
very_large_string.split("|") { |chunk| return chunk if chunk.include?('DATE') }
# This could be rewritten more idiomatically with to_enum:
very_large_string.to_enum(:split, "|").lazy.grep(/DATE/).first

It is typical to call #to_enum when defining methods for a generic Enumerable, in case no block is passed.

Here is such an example, with parameter passing and a sizing block:

module Enumerable
  # a generic method to repeat the values of any enumerable
  def repeat(n)
    raise ArgumentError, "#{n} is negative!" if n < 0
    unless block_given?
      return to_enum(__method__, n) do # __method__ is :repeat here
        sz = size     # Call size and multiply by n...
        sz * n if sz  # but return nil if size itself is nil
      end
    end
    each do |*val|
      n.times { yield *val }
    end
  end
end

%[hello world].repeat(2) { |w| puts w }
  # => Prints 'hello', 'hello', 'world', 'world'
enum = (1..14).repeat(3)
  # => returns an Enumerator when called without a block
enum.first(4) # => [1, 1, 1, 2]
enum.size # => 42

 
               static VALUE
obj_to_enum(int argc, VALUE *argv, VALUE obj)
{
    VALUE enumerator, meth = sym_each;

    if (argc > 0) {
        --argc;
        meth = *argv++;
    }
    enumerator = rb_enumeratorize_with_size(obj, meth, argc, argv, 0);
    if (rb_block_given_p()) {
        enumerator_ptr(enumerator)->size = rb_block_proc();
    }
    return enumerator;
}
            

Equality — At the Object level, #== returns true only if obj and other are the same object. Typically, this method is overridden in descendant classes to provide class-specific meaning.

Unlike #==, the equal? method should never be overridden by subclasses as it is used to determine object identity (that is, a.equal?(b) if and only if a is the same object as b):

obj = "a"
other = obj.dup

obj == other      #=> true
obj.equal? other  #=> false
obj.equal? obj    #=> true

The eql? method returns true if obj and other refer to the same hash key. This is used by Hash to test members for equality. For any pair of objects where eql? returns true, the hash value of both objects must be equal. So any subclass that overrides eql? should also override hash appropriately.

For objects of class Object, eql? is synonymous with #==. Subclasses normally continue this tradition by aliasing eql? to their overridden #== method, but there are exceptions. Numeric types, for example, perform type conversion across #==, but not across eql?, so:

1 == 1.0     #=> true
1.eql? 1.0   #=> false

 
               MJIT_FUNC_EXPORTED VALUE
rb_obj_equal(VALUE obj1, VALUE obj2)
{
    if (obj1 == obj2) return Qtrue;
    return Qfalse;
}
            

Adds to obj the instance methods from each module given as a parameter.

module Mod
  def hello
    "Hello from Mod.\n"
  end
end

class Klass
  def hello
    "Hello from Klass.\n"
  end
end

k = Klass.new
k.hello         #=> "Hello from Klass.\n"
k.extend(Mod)   #=> #<Klass:0x401b3bc8>
k.hello         #=> "Hello from Mod.\n"

 
               static VALUE
rb_obj_extend(int argc, VALUE *argv, VALUE obj)
{
    int i;
    ID id_extend_object, id_extended;

    CONST_ID(id_extend_object, "extend_object");
    CONST_ID(id_extended, "extended");

    rb_check_arity(argc, 1, UNLIMITED_ARGUMENTS);
    for (i = 0; i < argc; i++)
        Check_Type(argv[i], T_MODULE);
    while (argc--) {
        rb_funcall(argv[argc], id_extend_object, 1, obj);
        rb_funcall(argv[argc], id_extended, 1, obj);
    }
    return obj;
}
            

Prevents further modifications to obj. A RuntimeError will be raised if modification is attempted. There is no way to unfreeze a frozen object. See also Kernel#frozen?.

This method returns self.

a = [ "a", "b", "c" ]
a.freeze
a << "z"

produces:

prog.rb:3:in `<<': can't modify frozen Array (FrozenError)
 from prog.rb:3

Objects of the following classes are always frozen: Integer, Float, Symbol.

 
               VALUE
rb_obj_freeze(VALUE obj)
{
    if (!OBJ_FROZEN(obj)) {
        OBJ_FREEZE(obj);
        if (SPECIAL_CONST_P(obj)) {
            rb_bug("special consts should be frozen.");
        }
    }
    return obj;
}
            

Generates an Integer hash value for this object. This function must have the property that a.eql?(b) implies a.hash == b.hash.

The hash value is used along with eql? by the Hash class to determine if two objects reference the same hash key. Any hash value that exceeds the capacity of an Integer will be truncated before being used.

The hash value for an object may not be identical across invocations or implementations of Ruby. If you need a stable identifier across Ruby invocations and implementations you will need to generate one with a custom method.

Certain core classes such as Integer use built-in hash calculations and do not call the hash method when used as a hash key.

 
               VALUE
rb_obj_hash(VALUE obj)
{
    long hnum = any_hash(obj, objid_hash);
    return ST2FIX(hnum);
}
            

Returns a string containing a human-readable representation of obj. The default inspect shows the object's class name, an encoding of its memory address, and a list of the instance variables and their values (by calling inspect on each of them). User defined classes should override this method to provide a better representation of obj. When overriding this method, it should return a string whose encoding is compatible with the default external encoding.

[ 1, 2, 3..4, 'five' ].inspect   #=> "[1, 2, 3..4, \"five\"]"
Time.new.inspect                 #=> "2008-03-08 19:43:39 +0900"

class Foo
end
Foo.new.inspect                  #=> "#<Foo:0x0300c868>"

class Bar
  def initialize
    @bar = 1
  end
end
Bar.new.inspect                  #=> "#<Bar:0x0300c868 @bar=1>"

 
               static VALUE
rb_obj_inspect(VALUE obj)
{
    if (rb_ivar_count(obj) > 0) {
        VALUE str;
        VALUE c = rb_class_name(CLASS_OF(obj));

        str = rb_sprintf("-<%"PRIsVALUE":%p", c, (void*)obj);
        return rb_exec_recursive(inspect_obj, obj, str);
    }
    else {
        return rb_any_to_s(obj);
    }
}
            

Returns true if obj is an instance of the given class. See also #kind_of?.

class A;     end
class B < A; end
class C < B; end

b = B.new
b.instance_of? A   #=> false
b.instance_of? B   #=> true
b.instance_of? C   #=> false

 
               VALUE
rb_obj_is_instance_of(VALUE obj, VALUE c)
{
    c = class_or_module_required(c);
    if (rb_obj_class(obj) == c) return Qtrue;
    return Qfalse;
}
            

Returns true if the given instance variable is defined in obj. String arguments are converted to symbols.

class Fred
  def initialize(p1, p2)
    @a, @b = p1, p2
  end
end
fred = Fred.new('cat', 99)
fred.instance_variable_defined?(:@a)    #=> true
fred.instance_variable_defined?("@b")   #=> true
fred.instance_variable_defined?("@c")   #=> false

 
               static VALUE
rb_obj_ivar_defined(VALUE obj, VALUE iv)
{
    ID id = id_for_var(obj, iv, instance);

    if (!id) {
        return Qfalse;
    }
    return rb_ivar_defined(obj, id);
}
            

Returns the value of the given instance variable, or nil if the instance variable is not set. The @ part of the variable name should be included for regular instance variables. Throws a NameError exception if the supplied symbol is not valid as an instance variable name. String arguments are converted to symbols.

class Fred
  def initialize(p1, p2)
    @a, @b = p1, p2
  end
end
fred = Fred.new('cat', 99)
fred.instance_variable_get(:@a)    #=> "cat"
fred.instance_variable_get("@b")   #=> 99

 
               static VALUE
rb_obj_ivar_get(VALUE obj, VALUE iv)
{
    ID id = id_for_var(obj, iv, instance);

    if (!id) {
        return Qnil;
    }
    return rb_ivar_get(obj, id);
}
            

Sets the instance variable named by symbol to the given object. This may circumvent the encapsulation intended by the author of the class, so it should be used with care. The variable does not have to exist prior to this call. If the instance variable name is passed as a string, that string is converted to a symbol.

class Fred
  def initialize(p1, p2)
    @a, @b = p1, p2
  end
end
fred = Fred.new('cat', 99)
fred.instance_variable_set(:@a, 'dog')   #=> "dog"
fred.instance_variable_set(:@c, 'cat')   #=> "cat"
fred.inspect                             #=> "#<Fred:0x401b3da8 @a=\"dog\", @b=99, @c=\"cat\">"

 
               static VALUE
rb_obj_ivar_set(VALUE obj, VALUE iv, VALUE val)
{
    ID id = id_for_var(obj, iv, instance);
    if (!id) id = rb_intern_str(iv);
    return rb_ivar_set(obj, id, val);
}
            

Returns an array of instance variable names for the receiver. Note that simply defining an accessor does not create the corresponding instance variable.

class Fred
  attr_accessor :a1
  def initialize
    @iv = 3
  end
end
Fred.new.instance_variables   #=> [:@iv]

 
               VALUE
rb_obj_instance_variables(VALUE obj)
{
    VALUE ary;

    ary = rb_ary_new();
    rb_ivar_foreach(obj, ivar_i, ary);
    return ary;
}
            

Returns true if class is the class of obj, or if class is one of the superclasses of obj or modules included in obj.

module M;    end
class A
  include M
end
class B < A; end
class C < B; end

b = B.new
b.is_a? A          #=> true
b.is_a? B          #=> true
b.is_a? C          #=> false
b.is_a? M          #=> true

b.kind_of? A       #=> true
b.kind_of? B       #=> true
b.kind_of? C       #=> false
b.kind_of? M       #=> true

 
               VALUE
rb_obj_is_kind_of(VALUE obj, VALUE c)
{
    VALUE cl = CLASS_OF(obj);

    c = class_or_module_required(c);
    return class_search_ancestor(cl, RCLASS_ORIGIN(c)) ? Qtrue : Qfalse;
}
            

Returns the receiver.

string = "my string"
string.itself.object_id == string.object_id   #=> true

 
               static VALUE
rb_obj_itself(VALUE obj)
{
    return obj;
}
            

Returns true if class is the class of obj, or if class is one of the superclasses of obj or modules included in obj.

module M;    end
class A
  include M
end
class B < A; end
class C < B; end

b = B.new
b.is_a? A          #=> true
b.is_a? B          #=> true
b.is_a? C          #=> false
b.is_a? M          #=> true

b.kind_of? A       #=> true
b.kind_of? B       #=> true
b.kind_of? C       #=> false
b.kind_of? M       #=> true

 
               VALUE
rb_obj_is_kind_of(VALUE obj, VALUE c)
{
    VALUE cl = CLASS_OF(obj);

    c = class_or_module_required(c);
    return class_search_ancestor(cl, RCLASS_ORIGIN(c)) ? Qtrue : Qfalse;
}
            

Looks up the named method as a receiver in obj, returning a Method object (or raising NameError). The Method object acts as a closure in obj's object instance, so instance variables and the value of self remain available.

class Demo
  def initialize(n)
    @iv = n
  end
  def hello()
    "Hello, @iv = #{@iv}"
  end
end

k = Demo.new(99)
m = k.method(:hello)
m.call   #=> "Hello, @iv = 99"

l = Demo.new('Fred')
m = l.method("hello")
m.call   #=> "Hello, @iv = Fred"

Note that Method implements to_proc method, which means it can be used with iterators.

[ 1, 2, 3 ].each(&method(:puts)) # => prints 3 lines to stdout

out = File.open('test.txt', 'w')
[ 1, 2, 3 ].each(&out.method(:puts)) # => prints 3 lines to file

require 'date'
%w[2017-03-01 2017-03-02].collect(&Date.method(:parse))
#=> [#<Date: 2017-03-01 ((2457814j,0s,0n),+0s,2299161j)>, #<Date: 2017-03-02 ((2457815j,0s,0n),+0s,2299161j)>]

 
               VALUE
rb_obj_method(VALUE obj, VALUE vid)
{
    return obj_method(obj, vid, FALSE);
}
            

Returns a list of the names of public and protected methods of obj. This will include all the methods accessible in obj's ancestors. If the optional parameter is false, it returns an array of obj's public and protected singleton methods, the array will not include methods in modules included in obj.

class Klass
  def klass_method()
  end
end
k = Klass.new
k.methods[0..9]    #=> [:klass_method, :nil?, :===,
                   #    :==~, :!, :eql?
                   #    :hash, :<=>, :class, :singleton_class]
k.methods.length   #=> 56

k.methods(false)   #=> []
def k.singleton_method; end
k.methods(false)   #=> [:singleton_method]

module M123; def m123; end end
k.extend M123
k.methods(false)   #=> [:singleton_method]

 
               VALUE
rb_obj_methods(int argc, const VALUE *argv, VALUE obj)
{
    rb_check_arity(argc, 0, 1);
    if (argc > 0 && !RTEST(argv[0])) {
	return rb_obj_singleton_methods(argc, argv, obj);
    }
    return class_instance_method_list(argc, argv, CLASS_OF(obj), 1, ins_methods_i);
}
            

Only the object nil responds true to nil?.

Object.new.nil?   #=> false
nil.nil?          #=> true

 
               MJIT_FUNC_EXPORTED VALUE
rb_false(VALUE obj)
{
    return Qfalse;
}
            

Returns an integer identifier for obj.

The same number will be returned on all calls to object_id for a given object, and no two active objects will share an id.

Note: that some objects of builtin classes are reused for optimization. This is the case for immediate values and frozen string literals.

BasicObject implements +__id__+, Kernel implements object_id.

Immediate values are not passed by reference but are passed by value: nil, true, false, Fixnums, Symbols, and some Floats.

Object.new.object_id  == Object.new.object_id  # => false
(21 * 2).object_id    == (21 * 2).object_id    # => true
"hello".object_id     == "hello".object_id     # => false
"hi".freeze.object_id == "hi".freeze.object_id # => true

 
               VALUE
rb_obj_id(VALUE obj)
{
    /*
     *                32-bit VALUE space
     *          MSB ------------------------ LSB
     *  false   00000000000000000000000000000000
     *  true    00000000000000000000000000000010
     *  nil     00000000000000000000000000000100
     *  undef   00000000000000000000000000000110
     *  symbol  ssssssssssssssssssssssss00001110
     *  object  oooooooooooooooooooooooooooooo00        = 0 (mod sizeof(RVALUE))
     *  fixnum  fffffffffffffffffffffffffffffff1
     *
     *                    object_id space
     *                                       LSB
     *  false   00000000000000000000000000000000
     *  true    00000000000000000000000000000010
     *  nil     00000000000000000000000000000100
     *  undef   00000000000000000000000000000110
     *  symbol   000SSSSSSSSSSSSSSSSSSSSSSSSSSS0        S...S % A = 4 (S...S = s...s * A + 4)
     *  object   oooooooooooooooooooooooooooooo0        o...o % A = 0
     *  fixnum  fffffffffffffffffffffffffffffff1        bignum if required
     *
     *  where A = sizeof(RVALUE)/4
     *
     *  sizeof(RVALUE) is
     *  20 if 32-bit, double is 4-byte aligned
     *  24 if 32-bit, double is 8-byte aligned
     *  40 if 64-bit
     */

    return rb_find_object_id(obj, cached_object_id);
}
            

Returns the list of private methods accessible to obj. If the all parameter is set to false, only those methods in the receiver will be listed.

 
               VALUE
rb_obj_private_methods(int argc, const VALUE *argv, VALUE obj)
{
    return class_instance_method_list(argc, argv, CLASS_OF(obj), 1, ins_methods_priv_i);
}
            

Returns the list of protected methods accessible to obj. If the all parameter is set to false, only those methods in the receiver will be listed.

 
               VALUE
rb_obj_protected_methods(int argc, const VALUE *argv, VALUE obj)
{
    return class_instance_method_list(argc, argv, CLASS_OF(obj), 1, ins_methods_prot_i);
}
            

Similar to method, searches public method only.

 
               VALUE
rb_obj_public_method(VALUE obj, VALUE vid)
{
    return obj_method(obj, vid, TRUE);
}
            

Returns the list of public methods accessible to obj. If the all parameter is set to false, only those methods in the receiver will be listed.

 
               VALUE
rb_obj_public_methods(int argc, const VALUE *argv, VALUE obj)
{
    return class_instance_method_list(argc, argv, CLASS_OF(obj), 1, ins_methods_pub_i);
}
            

Invokes the method identified by symbol, passing it any arguments specified. Unlike send, #public_send calls public methods only. When the method is identified by a string, the string is converted to a symbol.

1.public_send(:puts, "hello")  # causes NoMethodError

 
               static VALUE
rb_f_public_send(int argc, VALUE *argv, VALUE recv)
{
    return send_internal_kw(argc, argv, recv, CALL_PUBLIC);
}
            

Removes the named instance variable from obj, returning that variable's value. String arguments are converted to symbols.

class Dummy
  attr_reader :var
  def initialize
    @var = 99
  end
  def remove
    remove_instance_variable(:@var)
  end
end
d = Dummy.new
d.var      #=> 99
d.remove   #=> 99
d.var      #=> nil

 
               VALUE
rb_obj_remove_instance_variable(VALUE obj, VALUE name)
{
    VALUE val = Qnil;
    const ID id = id_for_var(obj, name, an, instance);
    st_data_t n, v;
    struct st_table *iv_index_tbl;
    uint32_t index;

    rb_check_frozen(obj);
    if (!id) {
	goto not_defined;
    }

    switch (BUILTIN_TYPE(obj)) {
      case T_OBJECT:
        iv_index_tbl = ROBJECT_IV_INDEX_TBL(obj);
        if (iv_index_tbl_lookup(iv_index_tbl, id, &index) &&
            index < ROBJECT_NUMIV(obj) &&
            (val = ROBJECT_IVPTR(obj)[index]) != Qundef) {
            ROBJECT_IVPTR(obj)[index] = Qundef;
            return val;
        }
	break;
      case T_CLASS:
      case T_MODULE:
        IVAR_ACCESSOR_SHOULD_BE_MAIN_RACTOR(id);
	n = id;
	if (RCLASS_IV_TBL(obj) && st_delete(RCLASS_IV_TBL(obj), &n, &v)) {
	    return (VALUE)v;
	}
	break;
      default:
	if (FL_TEST(obj, FL_EXIVAR)) {
	    if (generic_ivar_remove(obj, id, &val)) {
		return val;
	    }
	}
	break;
    }

  not_defined:
    rb_name_err_raise("instance variable %1$s not defined",
		      obj, name);
    UNREACHABLE_RETURN(Qnil);
}
            

Returns true if obj responds to the given method. Private and protected methods are included in the search only if the optional second parameter evaluates to true.

If the method is not implemented, as Process.fork on Windows, File.lchmod on GNU/Linux, etc., false is returned.

If the method is not defined, respond_to_missing? method is called and the result is returned.

When the method name parameter is given as a string, the string is converted to a symbol.

 
               static VALUE
obj_respond_to(int argc, VALUE *argv, VALUE obj)
{
    VALUE mid, priv;
    ID id;
    rb_execution_context_t *ec = GET_EC();

    rb_scan_args(argc, argv, "11", &mid, &priv);
    if (!(id = rb_check_id(&mid))) {
        VALUE ret = basic_obj_respond_to_missing(ec, CLASS_OF(obj), obj,
                                                 rb_to_symbol(mid), priv);
        if (ret == Qundef) ret = Qfalse;
        return ret;
    }
    if (basic_obj_respond_to(ec, CLASS_OF(obj), obj, id, !RTEST(priv)))
        return Qtrue;
    return Qfalse;
}
            

DO NOT USE THIS DIRECTLY.

Hook method to return whether the obj can respond to id method or not.

When the method name parameter is given as a string, the string is converted to a symbol.

See respond_to?, and the example of BasicObject.

 
               static VALUE
obj_respond_to_missing(VALUE obj, VALUE mid, VALUE priv)
{
    return Qfalse;
}
            

Invokes the method identified by symbol, passing it any arguments specified. When the method is identified by a string, the string is converted to a symbol.

BasicObject implements +__send__+, Kernel implements send. __send__ is safer than send when obj has the same method name like Socket. See also public_send.

class Klass
  def hello(*args)
    "Hello " + args.join(' ')
  end
end
k = Klass.new
k.send :hello, "gentle", "readers"   #=> "Hello gentle readers"

 
               VALUE
rb_f_send(int argc, VALUE *argv, VALUE recv)
{
    return send_internal_kw(argc, argv, recv, CALL_FCALL);
}
            

Returns the singleton class of obj. This method creates a new singleton class if obj does not have one.

If obj is nil, true, or false, it returns NilClass, TrueClass, or FalseClass, respectively. If obj is an Integer, a Float or a Symbol, it raises a TypeError.

Object.new.singleton_class  #=> #<Class:#<Object:0xb7ce1e24>>
String.singleton_class      #=> #<Class:String>
nil.singleton_class         #=> NilClass

 
               static VALUE
rb_obj_singleton_class(VALUE obj)
{
    return rb_singleton_class(obj);
}
            

Similar to method, searches singleton method only.

class Demo
  def initialize(n)
    @iv = n
  end
  def hello()
    "Hello, @iv = #{@iv}"
  end
end

k = Demo.new(99)
def k.hi
  "Hi, @iv = #{@iv}"
end
m = k.singleton_method(:hi)
m.call   #=> "Hi, @iv = 99"
m = k.singleton_method(:hello) #=> NameError

 
               VALUE
rb_obj_singleton_method(VALUE obj, VALUE vid)
{
    VALUE klass = rb_singleton_class_get(obj);
    ID id = rb_check_id(&vid);

    if (NIL_P(klass)) {
        /* goto undef; */
    }
    else if (NIL_P(klass = RCLASS_ORIGIN(klass))) {
        /* goto undef; */
    }
    else if (! id) {
        VALUE m = mnew_missing_by_name(klass, obj, &vid, FALSE, rb_cMethod);
        if (m) return m;
        /* else goto undef; */
    }
    else {
        const rb_method_entry_t *me = rb_method_entry_at(klass, id);
        vid = ID2SYM(id);

        if (UNDEFINED_METHOD_ENTRY_P(me)) {
            /* goto undef; */
        }
        else if (UNDEFINED_REFINED_METHOD_P(me->def)) {
            /* goto undef; */
        }
        else {
            return mnew_from_me(me, klass, klass, obj, id, rb_cMethod, FALSE);
        }
    }

  /* undef: */
    rb_name_err_raise("undefined singleton method `%1$s' for `%2$s'",
                      obj, vid);
    UNREACHABLE_RETURN(Qundef);
}
            

Returns an array of the names of singleton methods for obj. If the optional all parameter is true, the list will include methods in modules included in obj. Only public and protected singleton methods are returned.

module Other
  def three() end
end

class Single
  def Single.four() end
end

a = Single.new

def a.one()
end

class << a
  include Other
  def two()
  end
end

Single.singleton_methods    #=> [:four]
a.singleton_methods(false)  #=> [:two, :one]
a.singleton_methods         #=> [:two, :one, :three]

 
               VALUE
rb_obj_singleton_methods(int argc, const VALUE *argv, VALUE obj)
{
    VALUE ary, klass, origin;
    struct method_entry_arg me_arg;
    struct rb_id_table *mtbl;
    int recur = TRUE;

    if (rb_check_arity(argc, 0, 1)) recur = RTEST(argv[0]);
    if (RB_TYPE_P(obj, T_CLASS) && FL_TEST(obj, FL_SINGLETON)) {
        rb_singleton_class(obj);
    }
    klass = CLASS_OF(obj);
    origin = RCLASS_ORIGIN(klass);
    me_arg.list = st_init_numtable();
    me_arg.recur = recur;
    if (klass && FL_TEST(klass, FL_SINGLETON)) {
	if ((mtbl = RCLASS_M_TBL(origin)) != 0) rb_id_table_foreach(mtbl, method_entry_i, &me_arg);
	klass = RCLASS_SUPER(klass);
    }
    if (recur) {
	while (klass && (FL_TEST(klass, FL_SINGLETON) || RB_TYPE_P(klass, T_ICLASS))) {
	    if (klass != origin && (mtbl = RCLASS_M_TBL(klass)) != 0) rb_id_table_foreach(mtbl, method_entry_i, &me_arg);
	    klass = RCLASS_SUPER(klass);
	}
    }
    ary = rb_ary_new2(me_arg.list->num_entries);
    st_foreach(me_arg.list, ins_methods_i, ary);
    st_free_table(me_arg.list);

    return ary;
}
            

Returns object. This method is deprecated and will be removed in Ruby 3.2.

 
               VALUE
rb_obj_taint(VALUE obj)
{
    rb_warn_deprecated_to_remove("Object#taint", "3.2");
    return obj;
}
            

Returns false. This method is deprecated and will be removed in Ruby 3.2.

 
               VALUE
rb_obj_tainted(VALUE obj)
{
    rb_warn_deprecated_to_remove("Object#tainted?", "3.2");
    return Qfalse;
}
            

Creates a new Enumerator which will enumerate by calling method on obj, passing args if any. What was yielded by method becomes values of enumerator.

If a block is given, it will be used to calculate the size of the enumerator without the need to iterate it (see Enumerator#size).

Examples¶ ↑

str = "xyz"

enum = str.enum_for(:each_byte)
enum.each { |b| puts b }
# => 120
# => 121
# => 122

# protect an array from being modified by some_method
a = [1, 2, 3]
some_method(a.to_enum)

# String#split in block form is more memory-effective:
very_large_string.split("|") { |chunk| return chunk if chunk.include?('DATE') }
# This could be rewritten more idiomatically with to_enum:
very_large_string.to_enum(:split, "|").lazy.grep(/DATE/).first

It is typical to call #to_enum when defining methods for a generic Enumerable, in case no block is passed.

Here is such an example, with parameter passing and a sizing block:

module Enumerable
  # a generic method to repeat the values of any enumerable
  def repeat(n)
    raise ArgumentError, "#{n} is negative!" if n < 0
    unless block_given?
      return to_enum(__method__, n) do # __method__ is :repeat here
        sz = size     # Call size and multiply by n...
        sz * n if sz  # but return nil if size itself is nil
      end
    end
    each do |*val|
      n.times { yield *val }
    end
  end
end

%[hello world].repeat(2) { |w| puts w }
  # => Prints 'hello', 'hello', 'world', 'world'
enum = (1..14).repeat(3)
  # => returns an Enumerator when called without a block
enum.first(4) # => [1, 1, 1, 2]
enum.size # => 42

 
               static VALUE
obj_to_enum(int argc, VALUE *argv, VALUE obj)
{
    VALUE enumerator, meth = sym_each;

    if (argc > 0) {
        --argc;
        meth = *argv++;
    }
    enumerator = rb_enumeratorize_with_size(obj, meth, argc, argv, 0);
    if (rb_block_given_p()) {
        enumerator_ptr(enumerator)->size = rb_block_proc();
    }
    return enumerator;
}
            

Returns a string representing obj. The default to_s prints the object's class and an encoding of the object id. As a special case, the top-level object that is the initial execution context of Ruby programs returns “main''.

 
               VALUE
rb_any_to_s(VALUE obj)
{
    VALUE str;
    VALUE cname = rb_class_name(CLASS_OF(obj));

    str = rb_sprintf("#<%"PRIsVALUE":%p>", cname, (void*)obj);

    return str;
}
            

Returns object. This method is deprecated and will be removed in Ruby 3.2.

 
               VALUE
rb_obj_trust(VALUE obj)
{
    rb_warn_deprecated_to_remove("Object#trust", "3.2");
    return obj;
}
            

Returns object. This method is deprecated and will be removed in Ruby 3.2.

 
               VALUE
rb_obj_untaint(VALUE obj)
{
    rb_warn_deprecated_to_remove("Object#untaint", "3.2");
    return obj;
}
            

Returns object. This method is deprecated and will be removed in Ruby 3.2.

 
               VALUE
rb_obj_untrust(VALUE obj)
{
    rb_warn_deprecated_to_remove("Object#untrust", "3.2");
    return obj;
}
            

Returns false. This method is deprecated and will be removed in Ruby 3.2.

 
               VALUE
rb_obj_untrusted(VALUE obj)
{
    rb_warn_deprecated_to_remove("Object#untrusted?", "3.2");
    return Qfalse;
}