class Fiber::Scheduler

Invoked by any method that performs a non-reverse DNS lookup. The most notable method is Addrinfo.getaddrinfo, but there are many other.

The method is expected to return an array of strings corresponding to ip addresses the hostname is resolved to, or nil if it can not be resolved.

Fairly exhaustive list of all possible call-sites:

• Addrinfo.getaddrinfo

• Addrinfo.tcp

• Addrinfo.udp

• Addrinfo.ip

• Addrinfo.new

• Addrinfo.marshal_load

• SOCKSSocket.new

• TCPServer.new

• TCPSocket.new

• IPSocket.getaddress

• TCPSocket.gethostbyname

• UDPSocket#connect

• UDPSocket#bind

• UDPSocket#send

• Socket.getaddrinfo

• Socket.gethostbyname

• Socket.pack_sockaddr_in

• Socket.sockaddr_in

• Socket.unpack_sockaddr_in

VALUE
rb_fiber_scheduler_address_resolve(VALUE scheduler, VALUE hostname)
{
    VALUE arguments[] = {
        hostname
    };

    return rb_check_funcall(scheduler, id_address_resolve, 1, arguments);
}

Invoked by methods like Thread.join, and by Mutex, to signify that current Fiber is blocked until further notice (e.g. unblock) or until timeout has elapsed.

blocker is what we are waiting on, informational only (for debugging and logging). There are no guarantee about its value.

Expected to return boolean, specifying whether the blocking operation was successful or not.

VALUE
rb_fiber_scheduler_block(VALUE scheduler, VALUE blocker, VALUE timeout)
{
    return rb_funcall(scheduler, id_block, 2, blocker, timeout);
}

Called when the current thread exits. The scheduler is expected to implement this method in order to allow all waiting fibers to finalize their execution.

The suggested pattern is to implement the main event loop in the close method.

VALUE
rb_fiber_scheduler_close(VALUE scheduler)
{
    RUBY_ASSERT(ruby_thread_has_gvl_p());

    VALUE result;

    // The reason for calling `scheduler_close` before calling `close` is for
    // legacy schedulers which implement `close` and expect the user to call
    // it. Subsequently, that method would call `Fiber.set_scheduler(nil)`
    // which should call `scheduler_close`. If it were to call `close`, it
    // would create an infinite loop.

    result = rb_check_funcall(scheduler, id_scheduler_close, 0, NULL);
    if (!UNDEF_P(result)) return result;

    result = rb_check_funcall(scheduler, id_close, 0, NULL);
    if (!UNDEF_P(result)) return result;

    return Qnil;
}

Implementation of the Fiber.schedule. The method is expected to immediately run the given block of code in a separate non-blocking fiber, and to return that Fiber.

Minimal suggested implementation is:

def fiber(&block)
  fiber = Fiber.new(blocking: false, &block)
  fiber.resume
  fiber
end

Invoked by IO#pread or IO::Buffer#pread to read length bytes from io at offset from into a specified buffer (see IO::Buffer) at the given offset.

This method is semantically the same as io_read, but it allows to specify the offset to read from and is often better for asynchronous IO on the same file.

The method should be considered experimental.

VALUE
rb_fiber_scheduler_io_pread(VALUE scheduler, VALUE io, rb_off_t from, VALUE buffer, size_t length, size_t offset)
{
    VALUE arguments[] = {
        io, buffer, OFFT2NUM(from), SIZET2NUM(length), SIZET2NUM(offset)
    };

    return rb_check_funcall(scheduler, id_io_pread, 5, arguments);
}

Invoked by IO#pwrite or IO::Buffer#pwrite to write length bytes to io at offset from into a specified buffer (see IO::Buffer) at the given offset.

This method is semantically the same as io_write, but it allows to specify the offset to write to and is often better for asynchronous IO on the same file.

The method should be considered experimental.

VALUE
rb_fiber_scheduler_io_pwrite(VALUE scheduler, VALUE io, rb_off_t from, VALUE buffer, size_t length, size_t offset)
{
    VALUE arguments[] = {
        io, buffer, OFFT2NUM(from), SIZET2NUM(length), SIZET2NUM(offset)
    };

    return rb_check_funcall(scheduler, id_io_pwrite, 5, arguments);
}

Invoked by IO#read or IO#Buffer.read to read length bytes from io into a specified buffer (see IO::Buffer) at the given offset.

The length argument is the “minimum length to be read”. If the IO buffer size is 8KiB, but the length is 1024 (1KiB), up to 8KiB might be read, but at least 1KiB will be. Generally, the only case where less data than length will be read is if there is an error reading the data.

Specifying a length of 0 is valid and means try reading at least once and return any available data.

Suggested implementation should try to read from io in a non-blocking manner and call io_wait if the io is not ready (which will yield control to other fibers).

See IO::Buffer for an interface available to return data.

Expected to return number of bytes read, or, in case of an error, -errno (negated number corresponding to system’s error code).

The method should be considered experimental.

VALUE
rb_fiber_scheduler_io_read(VALUE scheduler, VALUE io, VALUE buffer, size_t length, size_t offset)
{
    VALUE arguments[] = {
        io, buffer, SIZET2NUM(length), SIZET2NUM(offset)
    };

    return rb_check_funcall(scheduler, id_io_read, 4, arguments);
}

Invoked by IO.select to ask whether the specified descriptors are ready for specified events within the specified timeout.

Expected to return the 3-tuple of Array of IOs that are ready.

VALUE rb_fiber_scheduler_io_select(VALUE scheduler, VALUE readables, VALUE writables, VALUE exceptables, VALUE timeout)
{
    VALUE arguments[] = {
        readables, writables, exceptables, timeout
    };

    return rb_fiber_scheduler_io_selectv(scheduler, 4, arguments);
}

Invoked by IO#wait, IO#wait_readable, IO#wait_writable to ask whether the specified descriptor is ready for specified events within the specified timeout.

events is a bit mask of IO::READABLE, IO::WRITABLE, and IO::PRIORITY.

Suggested implementation should register which Fiber is waiting for which resources and immediately calling Fiber.yield to pass control to other fibers. Then, in the close method, the scheduler might dispatch all the I/O resources to fibers waiting for it.

Expected to return the subset of events that are ready immediately.

VALUE
rb_fiber_scheduler_io_wait(VALUE scheduler, VALUE io, VALUE events, VALUE timeout)
{
    return rb_funcall(scheduler, id_io_wait, 3, io, events, timeout);
}

Invoked by IO#write or IO::Buffer#write to write length bytes to io from from a specified buffer (see IO::Buffer) at the given offset.

The length argument is the “minimum length to be written”. If the IO buffer size is 8KiB, but the length specified is 1024 (1KiB), at most 8KiB will be written, but at least 1KiB will be. Generally, the only case where less data than length will be written is if there is an error writing the data.

Specifying a length of 0 is valid and means try writing at least once, as much data as possible.

Suggested implementation should try to write to io in a non-blocking manner and call io_wait if the io is not ready (which will yield control to other fibers).

See IO::Buffer for an interface available to get data from buffer efficiently.

Expected to return number of bytes written, or, in case of an error, -errno (negated number corresponding to system’s error code).

The method should be considered experimental.

VALUE
rb_fiber_scheduler_io_write(VALUE scheduler, VALUE io, VALUE buffer, size_t length, size_t offset)
{
    VALUE arguments[] = {
        io, buffer, SIZET2NUM(length), SIZET2NUM(offset)
    };

    return rb_check_funcall(scheduler, id_io_write, 4, arguments);
}

Invoked by Kernel#sleep and Mutex#sleep and is expected to provide an implementation of sleeping in a non-blocking way. Implementation might register the current fiber in some list of “which fiber wait until what moment”, call Fiber.yield to pass control, and then in close resume the fibers whose wait period has elapsed.

VALUE
rb_fiber_scheduler_kernel_sleep(VALUE scheduler, VALUE timeout)
{
    return rb_funcall(scheduler, id_kernel_sleep, 1, timeout);
}

Invoked by Process::Status.wait in order to wait for a specified process. See that method description for arguments description.

Suggested minimal implementation:

Thread.new do
  Process::Status.wait(pid, flags)
end.value

This hook is optional: if it is not present in the current scheduler, Process::Status.wait will behave as a blocking method.

Expected to return a Process::Status instance.

VALUE
rb_fiber_scheduler_process_wait(VALUE scheduler, rb_pid_t pid, int flags)
{
    VALUE arguments[] = {
        PIDT2NUM(pid), RB_INT2NUM(flags)
    };

    return rb_check_funcall(scheduler, id_process_wait, 2, arguments);
}

Invoked by Timeout.timeout to execute the given block within the given duration. It can also be invoked directly by the scheduler or user code.

Attempt to limit the execution time of a given block to the given duration if possible. When a non-blocking operation causes the block‘s execution time to exceed the specified duration, that non-blocking operation should be interrupted by raising the specified exception_class constructed with the given exception_arguments.

General execution timeouts are often considered risky. This implementation will only interrupt non-blocking operations. This is by design because it’s expected that non-blocking operations can fail for a variety of unpredictable reasons, so applications should already be robust in handling these conditions and by implication timeouts.

However, as a result of this design, if the block does not invoke any non-blocking operations, it will be impossible to interrupt it. If you desire to provide predictable points for timeouts, consider adding +sleep(0)+.

If the block is executed successfully, its result will be returned.

The exception will typically be raised using Fiber#raise.

VALUE
rb_fiber_scheduler_timeout_after(VALUE scheduler, VALUE timeout, VALUE exception, VALUE message)
{
    VALUE arguments[] = {
        timeout, exception, message
    };

    return rb_check_funcall(scheduler, id_timeout_after, 3, arguments);
}

Invoked to wake up Fiber previously blocked with block (for example, Mutex#lock calls block and Mutex#unlock calls unblock). The scheduler should use the fiber parameter to understand which fiber is unblocked.

blocker is what was awaited for, but it is informational only (for debugging and logging), and it is not guaranteed to be the same value as the blocker for block.

VALUE
rb_fiber_scheduler_unblock(VALUE scheduler, VALUE blocker, VALUE fiber)
{
    RUBY_ASSERT(rb_obj_is_fiber(fiber));

    return rb_funcall(scheduler, id_unblock, 2, blocker, fiber);
}