class Tempfile

Creates a file in the underlying file system; returns a new File object based on that file.

With no block given and no arguments, creates and returns file whose:

• Class is File (not Tempfile).

• Directory is the system temporary directory (system-dependent).

• Generated filename is unique in that directory.

• Permissions are 0600; see File.

• Mode is 'w+' (read/write mode, positioned at the end).

With no block, the file is not removed automatically, and so should be explicitly removed.

Example:

f = Tempfile.create     # => #<File:/tmp/20220505-9795-17ky6f6>
f.class                 # => File
f.path                  # => "/tmp/20220505-9795-17ky6f6"
f.stat.mode.to_s(8)     # => "100600"
File.exist?(f.path)     # => true
File.unlink(f.path)
File.exist?(f.path)     # => false

Argument basename, if given, may be one of:

• A string: the generated filename begins with basename:

  Tempfile.create('foo') # => #<File:/tmp/foo20220505-9795-1gok8l9>
  

• An array of two strings [prefix, suffix]: the generated filename begins with prefix and ends with suffix:

  Tempfile.create(%w/foo .jpg/) # => #<File:/tmp/foo20220505-17839-tnjchh.jpg>
  

With arguments basename and tmpdir, the file is created in directory tmpdir:

Tempfile.create('foo', '.') # => #<File:./foo20220505-9795-1emu6g8>

Keyword arguments mode and options are passed directly to method File.open:

• The value given with mode must be an integer, and may be expressed as the logical OR of constants defined in File::Constants.

• For options, see Open Options.

With a block given, creates the file as above, passes it to the block, and returns the block’s value; before the return, the file object is closed and the underlying file is removed:

Tempfile.create {|file| file.path } # => "/tmp/20220505-9795-rkists"

Related: Tempfile.new.

# File tempfile.rb, line 437
def Tempfile.create(basename="", tmpdir=nil, mode: 0, **options)
  tmpfile = nil
  Dir::Tmpname.create(basename, tmpdir, **options) do |tmpname, n, opts|
    mode |= File::RDWR|File::CREAT|File::EXCL
    opts[:perm] = 0600
    tmpfile = File.open(tmpname, mode, **opts)
  end
  if block_given?
    begin
      yield tmpfile
    ensure
      unless tmpfile.closed?
        if File.identical?(tmpfile, tmpfile.path)
          unlinked = File.unlink tmpfile.path rescue nil
        end
        tmpfile.close
      end
      unless unlinked
        begin
          File.unlink tmpfile.path
        rescue Errno::ENOENT
        end
      end
    end
  else
    tmpfile
  end
end

Creates a file in the underlying file system; returns a new Tempfile object based on that file.

If possible, consider instead using Tempfile.create, which:

• Avoids the performance cost of delegation, incurred when Tempfile.new calls its superclass DelegateClass(File).

• Does not rely on a finalizer to close and unlink the file, which can be unreliable.

Creates and returns file whose:

• Class is Tempfile (not File, as in Tempfile.create).

• Directory is the system temporary directory (system-dependent).

• Generated filename is unique in that directory.

• Permissions are 0600; see File Permissions.

• Mode is 'w+' (read/write mode, positioned at the end).

The underlying file is removed when the Tempfile object dies and is reclaimed by the garbage collector.

Example:

f = Tempfile.new # => #<Tempfile:/tmp/20220505-17839-1s0kt30>
f.class               # => Tempfile
f.path                # => "/tmp/20220505-17839-1s0kt30"
f.stat.mode.to_s(8)   # => "100600"
File.exist?(f.path)   # => true
File.unlink(f.path)   #
File.exist?(f.path)   # => false

Argument basename, if given, may be one of:

• A string: the generated filename begins with basename:

  Tempfile.new('foo') # => #<Tempfile:/tmp/foo20220505-17839-1whk2f>
  

• An array of two strings [prefix, suffix]: the generated filename begins with prefix and ends with suffix:

  Tempfile.new(%w/foo .jpg/) # => #<Tempfile:/tmp/foo20220505-17839-58xtfi.jpg>
  

With arguments basename and tmpdir, the file is created in directory tmpdir:

Tempfile.new('foo', '.') # => #<Tempfile:./foo20220505-17839-xfstr8>

Keyword arguments mode and options are passed directly to method File.open:

• The value given with mode must be an integer, and may be expressed as the logical OR of constants defined in File::Constants.

• For options, see Open Options.

Related: Tempfile.create.

# File tempfile.rb, line 150
def initialize(basename="", tmpdir=nil, mode: 0, **options)
  warn "Tempfile.new doesn't call the given block.", uplevel: 1 if block_given?

  @unlinked = false
  @mode = mode|File::RDWR|File::CREAT|File::EXCL
  @finalizer_obj = Object.new
  tmpfile = nil
  ::Dir::Tmpname.create(basename, tmpdir, **options) do |tmpname, n, opts|
    opts[:perm] = 0600
    tmpfile = File.open(tmpname, @mode, **opts)
    @opts = opts.freeze
  end
  ObjectSpace.define_finalizer(@finalizer_obj, Remover.new(tmpfile.path))
  ObjectSpace.define_finalizer(self, Closer.new(tmpfile))

  super(tmpfile)
end

Creates a new Tempfile.

This method is not recommended and exists mostly for backward compatibility. Please use Tempfile.create instead, which avoids the cost of delegation, does not rely on a finalizer, and also unlinks the file when given a block.

Tempfile.open is still appropriate if you need the Tempfile to be unlinked by a finalizer and you cannot explicitly know where in the program the Tempfile can be unlinked safely.

If no block is given, this is a synonym for Tempfile.new.

If a block is given, then a Tempfile object will be constructed, and the block is run with the Tempfile object as argument. The Tempfile object will be automatically closed after the block terminates. However, the file will not be unlinked and needs to be manually unlinked with Tempfile#close! or Tempfile#unlink. The finalizer will try to unlink but should not be relied upon as it can keep the file on the disk much longer than intended. For instance, on CRuby, finalizers can be delayed due to conservative stack scanning and references left in unused memory.

The call returns the value of the block.

In any case, all arguments (*args) will be passed to Tempfile.new.

Tempfile.open('foo', '/home/temp') do |f|
   # ... do something with f ...
end

# Equivalent:
f = Tempfile.open('foo', '/home/temp')
begin
   # ... do something with f ...
ensure
   f.close
end

# File tempfile.rb, line 365
def open(*args, **kw)
  tempfile = new(*args, **kw)

  if block_given?
    begin
      yield(tempfile)
    ensure
      tempfile.close
    end
  else
    tempfile
  end
end

Closes the file. If unlink_now is true, then the file will be unlinked (deleted) after closing. Of course, you can choose to later call unlink if you do not unlink it now.

If you don’t explicitly unlink the temporary file, the removal will be delayed until the object is finalized.

# File tempfile.rb, line 208
def close(unlink_now=false)
  _close
  unlink if unlink_now
end

Closes and unlinks (deletes) the file. Has the same effect as called close(true).

# File tempfile.rb, line 215
def close!
  close(true)
end

Opens or reopens the file with mode “r+”.

# File tempfile.rb, line 188
def open
  _close
  ObjectSpace.undefine_finalizer(self)
  mode = @mode & ~(File::CREAT|File::EXCL)
  __setobj__(File.open(__getobj__.path, mode, **@opts))
  ObjectSpace.define_finalizer(self, Closer.new(__getobj__))
  __getobj__
end

Returns the full path name of the temporary file. This will be nil if unlink has been called.

# File tempfile.rb, line 268
def path
  @unlinked ? nil : __getobj__.path
end

Returns the size of the temporary file. As a side effect, the IO buffer is flushed before determining the size.

# File tempfile.rb, line 274
def size
  if !__getobj__.closed?
    __getobj__.size # File#size calls rb_io_flush_raw()
  else
    File.size(__getobj__.path)
  end
end

Unlinks (deletes) the file from the filesystem. One should always unlink the file after using it, as is explained in the “Explicit close” good practice section in the Tempfile overview:

file = Tempfile.new('foo')
begin
   # ...do something with file...
ensure
   file.close
   file.unlink   # deletes the temp file
end

Unlink-before-close¶ ↑

On POSIX systems it’s possible to unlink a file before closing it. This practice is explained in detail in the Tempfile overview (section “Unlink after creation”); please refer there for more information.

However, unlink-before-close may not be supported on non-POSIX operating systems. Microsoft Windows is the most notable case: unlinking a non-closed file will result in an error, which this method will silently ignore. If you want to practice unlink-before-close whenever possible, then you should write code like this:

file = Tempfile.new('foo')
file.unlink   # On Windows this silently fails.
begin
   # ... do something with file ...
ensure
   file.close!   # Closes the file handle. If the file wasn't unlinked
                 # because #unlink failed, then this method will attempt
                 # to do so again.
end

# File tempfile.rb, line 252
def unlink
  return if @unlinked
  begin
    File.unlink(__getobj__.path)
  rescue Errno::ENOENT
  rescue Errno::EACCES
    # may not be able to unlink on Windows; just ignore
    return
  end
  ObjectSpace.undefine_finalizer(@finalizer_obj)
  @unlinked = true
end