The IP address 10.24.39.113 is a private IPv4 address commonly used within local networks such as home, office, or enterprise environments. It is not accessible from the public internet and is designed specifically for internal communication between devices on the same network.
If you have encountered this address, it is most likely assigned to a device within your own Wi-Fi or wired network.
Is 10.24.39.113 a Public or Private IP?
The address 10.24.39.113 belongs to the 10.0.0.0/8 private IP range defined under Internet Assigned Numbers Authority (IANA) standards in RFC 1918.
Private IP addresses:
- Are not routable on the public internet
- Can be used freely by anyone
- Do not require registration with an internet registry
- Are designed for internal network communication
The specific subnet:
- CIDR block: 10.24.39.0/24
- Network range: 10.24.39.0 – 10.24.39.255
- Broadcast address: 10.24.39.255
This means up to 254 usable device addresses can exist within that subnet.
What Is 10.24.39.113 Typically Used For?
1. Internal Device Addressing
This IP may be assigned to:
- A desktop or laptop
- A smartphone or tablet
- A printer
- A network-attached storage (NAS) device
- A server
- A wireless access point
It allows devices to communicate with each other inside the same network.
2. Router or Gateway Management
Sometimes private IPs are used as router login addresses. In the 10.24.39.0/24 range, the router (default gateway) is often:
- 10.24.39.1
- 10.24.39.254
However, in some configurations, 10.24.39.113 could also be assigned to a router or network appliance.
To check, you can try entering the following into your browser:
http://10.24.39.113
or
https://10.24.39.113
If it loads a login page, it may be a router, access point, or network controller.
3. DHCP Assignment
Most networks use DHCP (Dynamic Host Configuration Protocol) to automatically assign private IP addresses to devices. This means:
- The router dynamically allocates an available IP
- The address may change over time
- You typically do not manually configure it
If your device shows 10.24.39.113, it was likely assigned automatically by your router.
Why Private IP Addresses Cannot Access the Internet Directly
Private IP addresses cannot be routed over the public internet. Instead, your router performs Network Address Translation (NAT).
Here’s how it works:
- Your device (10.24.39.113) sends a request to a website.
- The router translates your private IP into your public IP address.
- The response comes back to your public IP.
- The router translates it back to your private IP.
Without NAT, private networks could not connect to the internet.
Technical Breakdown of 10.24.39.113
- Address Type: Private
- Protocol Version: IPv4
- Network Class: Class A
- CIDR Block: 10.24.39.0/24
- Decimal (iplong): 169355121
- Hexadecimal: 0x0A182771
- Reverse DNS: 113.39.24.10.in-addr.arpa
Private vs Public IP Addresses
Understanding the difference is essential.
Private IP Address (like 10.24.39.113)
- Used only inside local networks
- Not unique globally
- Cannot be accessed from outside
- Free to use by anyone
Public IP Address
- Assigned by your ISP
- Must be globally unique
- Used to connect your network to the internet
- Can reveal approximate geographic location
Your router has both:
- A private IP inside your network
- A public IP assigned by your ISP
When you browse the internet, websites only see your public IP.
Dynamic vs Static Public IPs
Most home internet connections use dynamic public IP addresses. These change periodically because:
- IPv4 addresses are limited
- ISPs reuse them between customers
Static public IPs are typically reserved for:
- Business connections
- Web servers
- Email servers
- Data centers (“the cloud”)
Static IPs allow systems to remain accessible 24/7.
Can 10.24.39.113 Be a Security Risk?
By itself, no.
Private IP addresses:
- Cannot be reached from the internet directly
- Are shielded behind your router’s NAT
- Are only visible inside your own network
However, if someone gains access to your Wi-Fi, they could potentially interact with devices on private IPs. That’s why:
- Strong Wi-Fi passwords are important
- Router firmware should be kept updated
- Default admin passwords should be changed
When Would You Need to Use This IP?
You might use 10.24.39.113 if:
- You are troubleshooting a device on your network
- You are configuring a local server
- You are setting up port forwarding
- You are diagnosing network conflicts
- You are accessing a router or access point interface
Advanced users may assign static private IPs to devices like:
- CCTV systems
- Smart home hubs
- Business servers
- VoIP systems
Final Thoughts
10.24.39.113 is a standard private IPv4 address used inside local networks. It plays a role in internal communication between devices but cannot function independently on the public internet.
In simple terms:
- It helps devices talk to each other inside your network.
- Your router translates it to a public IP when accessing the internet.
- It is safe and normal to see on home or office networks.
If you see this IP on your device, it simply means you are connected to a private network operating within the 10.x.x.x address space — one of the most widely used private networking ranges in the world.