YJIT - Yet Another Ruby JIT ↑

YJIT is a lightweight, minimalistic Ruby JIT built inside CRuby. It lazily compiles code using a Basic Block Versioning (BBV) architecture. The target use case is that of servers running Ruby on Rails. YJIT is currently supported for macOS, Linux and BSD on x86-64 and arm64/aarch64 CPUs. This project is open source and falls under the same license as CRuby.

If you're using YJIT in production, please share your success stories with us!

If you wish to learn more about the approach taken, here are some conference talks and publications: - RubyKaigi 2022 keynote: Stories from developing YJIT - RubyKaigi 2022 talk: Building a Lightweight IR and Backend for YJIT - RubyKaigi 2021 talk: YJIT: Building a New JIT Compiler Inside CRuby - Blog post: YJIT: Building a New JIT Compiler Inside CRuby - VMIL 2021 paper: YJIT: A Basic Block Versioning JIT Compiler for CRuby - MoreVMs 2021 talk: YJIT: Building a New JIT Compiler Inside CRuby - ECOOP 2016 talk: Interprocedural Type Specialization of JavaScript Programs Without Type Analysis - ECOOP 2016 paper: Interprocedural Type Specialization of JavaScript Programs Without Type Analysis - ECOOP 2015 talk: Simple and Effective Type Check Removal through Lazy Basic Block Versioning - ECOOP 2015 paper: Simple and Effective Type Check Removal through Lazy Basic Block Versioning

To cite YJIT in your publications, please cite the VMIL 2021 paper:

@inproceedings{yjit_vmil2021,
author = {Chevalier-Boisvert, Maxime and Gibbs, Noah and Boussier, Jean and Wu, Si Xing (Alan) and Patterson, Aaron and Newton, Kevin and Hawthorn, John},
title = {YJIT: A Basic Block Versioning JIT Compiler for CRuby},
year = {2021},
isbn = {9781450391092},
publisher = {Association for Computing Machinery},
address = {New York, NY, USA},
url = {https://doi.org/10.1145/3486606.3486781},
doi = {10.1145/3486606.3486781},
booktitle = {Proceedings of the 13th ACM SIGPLAN International Workshop on Virtual Machines and Intermediate Languages},
pages = {25–32},
numpages = {8},
keywords = {ruby, dynamically typed, compiler, optimization, just-in-time, bytecode},
location = {Chicago, IL, USA},
series = {VMIL 2021}
}

Current Limitations ↑

YJIT may not be suitable for certain applications. It currently only supports macOS and Linux on x86-64 and arm64/aarch64 CPUs. YJIT will use more memory than the Ruby interpreter because the JIT compiler needs to generate machine code in memory and maintain additional state information. You can change how much executable memory is allocated using YJIT’s command-line options. There is a slight performance tradeoff because allocating less executable memory could result in the generated machine code being collected more often.

Installation ↑

Requirements ↑

You will need to install: - A C compiler such as GCC or Clang - GNU Make and Autoconf - The Rust compiler rustc and Cargo (if you want to build in dev/debug mode) - The Rust version must be >= 1.58.0.

To install the Rust build toolchain, we suggest following the recommended installation method. Rust also provides first class support for many source code editors.

Building YJIT ↑

Start by cloning the ruby/ruby repository:

git clone https://github.com/ruby/ruby yjit
cd yjit

The YJIT ruby binary can be built with either GCC or Clang. It can be built either in dev (debug) mode or in release mode. For maximum performance, compile YJIT in release mode with GCC. More detailed build instructions are provided in the Ruby README.

# Configure in release mode for maximum performance, build and install
./autogen.sh
./configure --enable-yjit --prefix=$HOME/.rubies/ruby-yjit --disable-install-doc
make -j && make install

or

# Configure in lower-performance dev (debug) mode for development, build and install
./autogen.sh
./configure --enable-yjit=dev --prefix=$HOME/.rubies/ruby-yjit --disable-install-doc
make -j && make install

Dev mode includes extended YJIT statistics, but can be slow. For only statistics you can configure in stats mode:

# Configure in extended-stats mode without slow runtime checks, build and install
./autogen.sh
./configure --enable-yjit=stats --prefix=$HOME/.rubies/ruby-yjit --disable-install-doc
make -j && make install

On macOS, you may need to specify where to find some libraries:

# Install dependencies
brew install openssl readline libyaml

# Configure in dev (debug) mode for development, build and install
./autogen.sh
./configure --enable-yjit=dev --prefix=$HOME/.rubies/ruby-yjit --disable-install-doc --with-opt-dir="$(brew --prefix openssl):$(brew --prefix readline):$(brew --prefix libyaml)"
make -j && make install

Typically configure will choose the default C compiler. To specify the C compiler, use

# Choosing a specific c compiler
export CC=/path/to/my/chosen/c/compiler

before running ./configure.

You can test that YJIT works correctly by running:

# Quick tests found in /bootstraptest
make btest

# Complete set of tests
make -j test-all

Usage ↑

Examples ↑

Once YJIT is built, you can either use ./miniruby from within your build directory, or switch to the YJIT version of ruby by using the chruby tool:

chruby ruby-yjit
ruby myscript.rb

You can dump statistics about compilation and execution by running YJIT with the --yjit-stats command-line option:

./miniruby --yjit-stats myscript.rb

The machine code generated for a given method can be printed by adding puts RubyVM::YJIT.disasm(method(:method_name)) to a Ruby script. Note that no code will be generated if the method is not compiled.

Command-Line Options ↑

YJIT supports all command-line options supported by upstream CRuby, but also adds a few YJIT-specific options:

Note that there is also an environment variable RUBY_YJIT_ENABLE which can be used to enable YJIT. This can be useful for some deployment scripts where specifying an extra command-line option to Ruby is not practical.

Benchmarking ↑

We have collected a set of benchmarks and implemented a simple benchmarking harness in the yjit-bench repository. This benchmarking harness is designed to disable CPU frequency scaling, set process affinity and disable address space randomization so that the variance between benchmarking runs will be as small as possible. Please kindly note that we are at an early stage in this project.

Performance Tips for Production Deployments ↑

While YJIT options default to what we think would work well for most workloads, they might not necessarily be the best configuration for your application.

This section covers tips on improving YJIT performance in case YJIT does not speed up your application in production.

Increasing –yjit-exec-mem-size ↑

When JIT code size (RubyVM::YJIT.runtime_stats[:code_region_size]) reaches this value, YJIT triggers “code GC” that frees all JIT code and starts recompiling everything. Compiling code takes some time, so scheduling code GC too frequently slows down your application. Increasing --yjit-exec-mem-size may speed up your application if RubyVM::YJIT.runtime_stats[:code_gc_count] is not 0 or 1.

Running workers as long as possible ↑

It’s helpful to call the same code as many times as possible before a process restarts. If a process is killed too frequently, the time taken for compiling methods may outweigh the speedup obtained by compiling them.

You should monitor the number of requests each process has served. If you’re periodically killing worker processes, e.g. with unicorn-worker-killer or puma_worker_killer, you may want to reduce the killing frequency or increase the limit.

Saving YJIT Memory Usage ↑

YJIT allocates memory for JIT code and metadata. Enabling YJIT generally results in more memory usage.

This section goes over tips on minimizing YJIT memory usage in case it uses more than your capacity.

Increasing –yjit-call-threshold ↑

As of Ruby 3.2, --yjit-call-threshold defaults to 30. With this default, some applications end up compiling methods that are used only during the application boot. Increasing this option may help you reduce the size of JIT code and metadata. It’s worth trying different values like --yjit-call-threshold=100.

Note that increasing the value too much may result in compiling code too late. You should monitor how many requests each worker processes before it’s restarted. For example, if each process only handles 1000 requests, --yjit-call-threshold=1000 might be too large for your application.

Decreasing –yjit-exec-mem-size ↑

--yjit-exec-mem-size specifies the JIT code size, but YJIT also uses memory for its metadata, which often consumes more memory than JIT code. Generally, YJIT adds memory overhead by roughly 3-4x of --yjit-exec-mem-size in production as of Ruby 3.2. You should multiply that by the number of worker processes to estimate the worst case memory overhead.

Running code GC adds overhead, but it could be still faster than recovering from a whole process killed by OOM.

Code Optimization Tips ↑

This section contains tips on writing Ruby code that will run as fast as possible on YJIT. Some of this advice is based on current limitations of YJIT, while other advice is broadly applicable. It probably won’t be practical to apply these tips everywhere in your codebase. You should ideally start by profiling your application using a tool such as stackprof so that you can determine which methods make up most of the execution time. You can then refactor the specific methods that make up the largest fractions of the execution time. We do not recommend modifying your entire codebase based on the current limitations of YJIT.

You can also use the --yjit-stats command-line option to see which bytecodes cause YJIT to exit, and refactor your code to avoid using these instructions in the hottest methods of your code.

Other Statistics ↑

If you run ruby with --yjit --yjit-stats, YJIT will track and return performance statistics in RubyVM::YJIT.runtime_stats.

$ RUBYOPT="--yjit --yjit-stats" irb
irb(main):001:0> RubyVM::YJIT.runtime_stats
=>
{:inline_code_size=>340745,
 :outlined_code_size=>297664,
 :all_stats=>true,
 :exec_instruction=>1547816,
 :send_callsite_not_simple=>7267,
 :send_kw_splat=>7,
 :send_ivar_set_method=>72,
...

Some of the counters include:

Counters starting with “exit_” show reasons for YJIT code taking a side exit (return to the interpreter.) See yjit_hacking.md for more details.

Performance counter names are not guaranteed to remain the same between Ruby versions. If you’re curious what one does, it’s usually best to search the source code for it — but it may change in a later Ruby version.

The printed text after a –yjit-stats run includes other information that may be named differently than the information in runtime_stats.

Contributing ↑

We welcome open source contributors. You should feel free to open new issues to report bugs or just to ask questions. Suggestions on how to make this readme file more helpful for new contributors are most welcome.

Bug fixes and bug reports are very valuable to us. If you find a bug in YJIT, it’s very possible be that nobody has reported it before, or that we don’t have a good reproduction for it, so please open an issue and provide as much information as you can about your configuration and a description of how you encountered the problem. List the commands you used to run YJIT so that we can easily reproduce the issue on our end and investigate it. If you are able to produce a small program reproducing the error to help us track it down, that is very much appreciated as well.

If you would like to contribute a large patch to YJIT, we suggest opening an issue or a discussion on this repository so that we can have an active discussion. A common problem is that sometimes people submit large pull requests to open source projects without prior communication, and we have to reject them because the work they implemented does not fit within the design of the project. We want to save you time and frustration, so please reach out and we can have a productive discussion as to how you can contribute things we will want to merge into YJIT.

Source Code Organization ↑

The YJIT source code is divided between: - yjit.c: code YJIT uses to interface with the rest of CRuby - yjit.h: C definitions YJIT exposes to the rest of the CRuby - yjit.rb: YJIT Ruby module that is exposed to Ruby - yjit/src/asm/*: in-memory assembler we use to generate machine code - yjit/src/codegen.rs: logic for translating Ruby bytecode to machine code - yjit/src/core.rb: basic block versioning logic, core structure of YJIT - yjit/src/stats.rs: gathering of run-time statistics - yjit/src/options.rs: handling of command-line options - yjit/bindgen/src/main.rs: C bindings exposed to the Rust codebase through bindgen - yjit/src/cruby.rs: C bindings manually exposed to the Rust codebase

The core of CRuby’s interpreter logic is found in: - insns.def: defines Ruby’s bytecode instructions (gets compiled into vm.inc) - vm_insnshelper.c: logic used by Ruby’s bytecode instructions - vm_exec.c: Ruby interpreter loop

Generating C bindings with bindgen ↑

In order to expose C functions to the Rust codebase, you will need to generate C bindings:

CC=clang ./configure --enable-yjit=dev
make -j yjit-bindgen

This uses the bindgen tools to generate/update yjit/src/cruby_bindings.inc.rs based on the bindings listed in yjit/bindgen/src/main.rs. Avoid manually editing this file as it could be automatically regenerated at a later time. If you need to manually add C bindings, add them to yjit/cruby.rs instead.

Coding & Debugging Protips ↑

There are 3 test suites: - make btest (see /bootstraptest) - make test-all - make test-spec - make check runs all of the above

The tests can be run in parallel like this:

make -j test-all RUN_OPTS="--yjit-call-threshold=1"

Or single-threaded like this, to more easily identify which specific test is failing:

make test-all TESTOPTS=--verbose RUN_OPTS="--yjit-call-threshold=1"

To debug a single test in test-all:

make test-all TESTS='test/-ext-/marshal/test_usrmarshal.rb' RUNRUBYOPT=--debugger=lldb RUN_OPTS="--yjit-call-threshold=1"

You can also run one specific test in btest:

make btest BTESTS=bootstraptest/test_ractor.rb RUN_OPTS="--yjit-call-threshold=1"

There are shortcuts to run/debug your own test/repro in test.rb:

make run  # runs ./miniruby test.rb
make lldb # launches ./miniruby test.rb in lldb

You can use the Intel syntax for disassembly in LLDB, keeping it consistent with YJIT’s disassembly:

echo "settings set target.x86-disassembly-flavor intel" >> ~/.lldbinit

Running x86 YJIT on Apple’s Rosetta ↑

For development purposes, it is possible to run x86 YJIT on an Apple M1 via Rosetta. You can find basic instructions below, but there are a few caveats listed further down.

First, install Rosetta:

$ softwareupdate --install-rosetta

Now any command can be run with Rosetta via the arch command line tool.

Then you can start your shell in an x86 environment:

$ arch -x86_64 zsh

You can double check your current architecture via the arch command:

$ arch -x86_64 zsh
$ arch
i386

You may need to set the default target for rustc to x86-64, e.g.

$ rustup default stable-x86_64-apple-darwin

While in your i386 shell, install Cargo and Homebrew, then hack away!

Rosetta Caveats ↑

  1. You must install a version of Homebrew for each architecture

  2. Cargo will install in $HOME/.cargo by default, and I don’t know a good way to change architectures after install

If you use Fish shell you can read this link for information on making the dev environment easier.