Support for the Ruby 2.4 series has ended. See here for reference.

In Files

  • drb/drb.rb
  • drb/eq.rb
  • drb/extserv.rb
  • drb/extservm.rb
  • drb/gw.rb
  • drb/invokemethod.rb
  • drb/observer.rb
  • drb/ssl.rb
  • drb/timeridconv.rb
  • drb/unix.rb

DRb

Overview

dRuby is a distributed object system for Ruby. It is written in pure Ruby and uses its own protocol. No add-in services are needed beyond those provided by the Ruby runtime, such as TCP sockets. It does not rely on or interoperate with other distributed object systems such as CORBA, RMI, or .NET.

dRuby allows methods to be called in one Ruby process upon a Ruby object located in another Ruby process, even on another machine. References to objects can be passed between processes. Method arguments and return values are dumped and loaded in marshalled format. All of this is done transparently to both the caller of the remote method and the object that it is called upon.

An object in a remote process is locally represented by a DRb::DRbObject instance. This acts as a sort of proxy for the remote object. Methods called upon this DRbObject instance are forwarded to its remote object. This is arranged dynamically at run time. There are no statically declared interfaces for remote objects, such as CORBA's IDL.

dRuby calls made into a process are handled by a DRb::DRbServer instance within that process. This reconstitutes the method call, invokes it upon the specified local object, and returns the value to the remote caller. Any object can receive calls over dRuby. There is no need to implement a special interface, or mixin special functionality. Nor, in the general case, does an object need to explicitly register itself with a DRbServer in order to receive dRuby calls.

One process wishing to make dRuby calls upon another process must somehow obtain an initial reference to an object in the remote process by some means other than as the return value of a remote method call, as there is initially no remote object reference it can invoke a method upon. This is done by attaching to the server by URI. Each DRbServer binds itself to a URI such as 'druby://example.com:8787'. A DRbServer can have an object attached to it that acts as the server's front object. A DRbObject can be explicitly created from the server's URI. This DRbObject's remote object will be the server's front object. This front object can then return references to other Ruby objects in the DRbServer's process.

Method calls made over dRuby behave largely the same as normal Ruby method calls made within a process. Method calls with blocks are supported, as are raising exceptions. In addition to a method's standard errors, a dRuby call may also raise one of the dRuby-specific errors, all of which are subclasses of DRb::DRbError.

Any type of object can be passed as an argument to a dRuby call or returned as its return value. By default, such objects are dumped or marshalled at the local end, then loaded or unmarshalled at the remote end. The remote end therefore receives a copy of the local object, not a distributed reference to it; methods invoked upon this copy are executed entirely in the remote process, not passed on to the local original. This has semantics similar to pass-by-value.

However, if an object cannot be marshalled, a dRuby reference to it is passed or returned instead. This will turn up at the remote end as a DRbObject instance. All methods invoked upon this remote proxy are forwarded to the local object, as described in the discussion of DRbObjects. This has semantics similar to the normal Ruby pass-by-reference.

The easiest way to signal that we want an otherwise marshallable object to be passed or returned as a DRbObject reference, rather than marshalled and sent as a copy, is to include the DRb::DRbUndumped mixin module.

dRuby supports calling remote methods with blocks. As blocks (or rather the Proc objects that represent them) are not marshallable, the block executes in the local, not the remote, context. Each value yielded to the block is passed from the remote object to the local block, then the value returned by each block invocation is passed back to the remote execution context to be collected, before the collected values are finally returned to the local context as the return value of the method invocation.

Examples of usage

For more dRuby samples, see the samples directory in the full dRuby distribution.

dRuby in client/server mode

This illustrates setting up a simple client-server drb system. Run the server and client code in different terminals, starting the server code first.

Server code

require 'drb/drb'

# The URI for the server to connect to
URI="druby://localhost:8787"

class TimeServer

  def get_current_time
    return Time.now
  end

end

# The object that handles requests on the server
FRONT_OBJECT=TimeServer.new

$SAFE = 1   # disable eval() and friends

DRb.start_service(URI, FRONT_OBJECT)
# Wait for the drb server thread to finish before exiting.
DRb.thread.join

Client code

require 'drb/drb'

# The URI to connect to
SERVER_URI="druby://localhost:8787"

# Start a local DRbServer to handle callbacks.
#
# Not necessary for this small example, but will be required
# as soon as we pass a non-marshallable object as an argument
# to a dRuby call.
#
# Note: this must be called at least once per process to take any effect.
# This is particularly important if your application forks.
DRb.start_service

timeserver = DRbObject.new_with_uri(SERVER_URI)
puts timeserver.get_current_time

Remote objects under dRuby

This example illustrates returning a reference to an object from a dRuby call. The Logger instances live in the server process. References to them are returned to the client process, where methods can be invoked upon them. These methods are executed in the server process.

Server code

require 'drb/drb'

URI="druby://localhost:8787"

class Logger

    # Make dRuby send Logger instances as dRuby references,
    # not copies.
    include DRb::DRbUndumped

    def initialize(n, fname)
        @name = n
        @filename = fname
    end

    def log(message)
        File.open(@filename, "a") do |f|
            f.puts("#{Time.now}: #{@name}: #{message}")
        end
    end

end

# We have a central object for creating and retrieving loggers.
# This retains a local reference to all loggers created.  This
# is so an existing logger can be looked up by name, but also
# to prevent loggers from being garbage collected.  A dRuby
# reference to an object is not sufficient to prevent it being
# garbage collected!
class LoggerFactory

    def initialize(bdir)
        @basedir = bdir
        @loggers = {}
    end

    def get_logger(name)
        if !@loggers.has_key? name
            # make the filename safe, then declare it to be so
            fname = name.gsub(/[.\/\\\:]/, "_").untaint
            @loggers[name] = Logger.new(name, @basedir + "/" + fname)
        end
        return @loggers[name]
    end

end

FRONT_OBJECT=LoggerFactory.new("/tmp/dlog")

$SAFE = 1   # disable eval() and friends

DRb.start_service(URI, FRONT_OBJECT)
DRb.thread.join

Client code

require 'drb/drb'

SERVER_URI="druby://localhost:8787"

DRb.start_service

log_service=DRbObject.new_with_uri(SERVER_URI)

["loga", "logb", "logc"].each do |logname|

    logger=log_service.get_logger(logname)

    logger.log("Hello, world!")
    logger.log("Goodbye, world!")
    logger.log("=== EOT ===")

end

Security

As with all network services, security needs to be considered when using dRuby. By allowing external access to a Ruby object, you are not only allowing outside clients to call the methods you have defined for that object, but by default to execute arbitrary Ruby code on your server. Consider the following:

# !!! UNSAFE CODE !!!
ro = DRbObject::new_with_uri("druby://your.server.com:8989")
class << ro
  undef :instance_eval  # force call to be passed to remote object
end
ro.instance_eval("`rm -rf *`")

The dangers posed by instance_eval and friends are such that a DRbServer should generally be run with $SAFE set to at least level 1. This will disable eval() and related calls on strings passed across the wire. The sample usage code given above follows this practice.

A DRbServer can be configured with an access control list to selectively allow or deny access from specified IP addresses. The main druby distribution provides the ACL class for this purpose. In general, this mechanism should only be used alongside, rather than as a replacement for, a good firewall.

dRuby internals

dRuby is implemented using three main components: a remote method call marshaller/unmarshaller; a transport protocol; and an ID-to-object mapper. The latter two can be directly, and the first indirectly, replaced, in order to provide different behaviour and capabilities.

Marshalling and unmarshalling of remote method calls is performed by a DRb::DRbMessage instance. This uses the Marshal module to dump the method call before sending it over the transport layer, then reconstitute it at the other end. There is normally no need to replace this component, and no direct way is provided to do so. However, it is possible to implement an alternative marshalling scheme as part of an implementation of the transport layer.

The transport layer is responsible for opening client and server network connections and forwarding dRuby request across them. Normally, it uses DRb::DRbMessage internally to manage marshalling and unmarshalling. The transport layer is managed by DRb::DRbProtocol. Multiple protocols can be installed in DRbProtocol at the one time; selection between them is determined by the scheme of a dRuby URI. The default transport protocol is selected by the scheme 'druby:', and implemented by DRb::DRbTCPSocket. This uses plain TCP/IP sockets for communication. An alternative protocol, using UNIX domain sockets, is implemented by DRb::DRbUNIXSocket in the file drb/unix.rb, and selected by the scheme 'drbunix:'. A sample implementation over HTTP can be found in the samples accompanying the main dRuby distribution.

The ID-to-object mapping component maps dRuby object ids to the objects they refer to, and vice versa. The implementation to use can be specified as part of a DRb::DRbServer's configuration. The default implementation is provided by DRb::DRbIdConv. It uses an object's ObjectSpace id as its dRuby id. This means that the dRuby reference to that object only remains meaningful for the lifetime of the object's process and the lifetime of the object within that process. A modified implementation is provided by DRb::TimerIdConv in the file drb/timeridconv.rb. This implementation retains a local reference to all objects exported over dRuby for a configurable period of time (defaulting to ten minutes), to prevent them being garbage-collected within this time. Another sample implementation is provided in sample/name.rb in the main dRuby distribution. This allows objects to specify their own id or “name”. A dRuby reference can be made persistent across processes by having each process register an object using the same dRuby name.

Attributes

primary_server[RW]

The primary local dRuby server.

This is the server created by the start_service call.

Public Class Methods

config() click to toggle source

Get the configuration of the current server.

If there is no current server, this returns the default configuration. See current_server and DRbServer::make_config.

 
               # File drb/drb.rb, line 1766
def config
  current_server.config
rescue
  DRbServer.make_config
end
            
current_server() click to toggle source

Get the 'current' server.

In the context of execution taking place within the main thread of a dRuby server (typically, as a result of a remote call on the server or one of its objects), the current server is that server. Otherwise, the current server is the primary server.

If the above rule fails to find a server, a DRbServerNotFound error is raised.

 
               # File drb/drb.rb, line 1723
def current_server
  drb = Thread.current['DRb']
  server = (drb && drb['server']) ? drb['server'] : @primary_server
  raise DRbServerNotFound unless server
  return server
end
            
fetch_server(uri) click to toggle source

Retrieves the server with the given uri.

See also regist_server and remove_server.

 
               # File drb/drb.rb, line 1863
def fetch_server(uri)
  @server[uri]
end
            
front() click to toggle source

Get the front object of the current server.

This raises a DRbServerNotFound error if there is no current server. See current_server.

 
               # File drb/drb.rb, line 1777
def front
  current_server.front
end
            
here?(uri) click to toggle source

Is uri the URI for the current local server?

 
               # File drb/drb.rb, line 1756
def here?(uri)
  current_server.here?(uri) rescue false
  # (current_server.uri rescue nil) == uri
end
            
install_acl(acl) click to toggle source

Set the default ACL to acl.

See DRb::DRbServer.default_acl.

 
               # File drb/drb.rb, line 1822
def install_acl(acl)
  DRbServer.default_acl(acl)
end
            
install_id_conv(idconv) click to toggle source

Set the default id conversion object.

This is expected to be an instance such as DRb::DRbIdConv that responds to to_id and to_obj that can convert objects to and from DRb references.

See DRbServer#default_id_conv.

 
               # File drb/drb.rb, line 1814
def install_id_conv(idconv)
  DRbServer.default_id_conv(idconv)
end
            
regist_server(server) click to toggle source

Registers server with DRb.

This is called when a new DRb::DRbServer is created.

If there is no primary server then server becomes the primary server.

Example:

require 'drb'

s = DRb::DRbServer.new # automatically calls regist_server
DRb.fetch_server s.uri #=> #<DRb::DRbServer:0x...>
 
               # File drb/drb.rb, line 1846
def regist_server(server)
  @server[server.uri] = server
  mutex.synchronize do
    @primary_server = server unless @primary_server
  end
end
            
remove_server(server) click to toggle source

Removes server from the list of registered servers.

 
               # File drb/drb.rb, line 1855
def remove_server(server)
  @server.delete(server.uri)
end
            
start_service(uri=nil, front=nil, config=nil) click to toggle source

Start a dRuby server locally.

The new dRuby server will become the primary server, even if another server is currently the primary server.

uri is the URI for the server to bind to. If nil, the server will bind to random port on the default local host name and use the default dRuby protocol.

front is the server's front object. This may be nil.

config is the configuration for the new server. This may be nil.

See DRbServer::new.

 
               # File drb/drb.rb, line 1702
def start_service(uri=nil, front=nil, config=nil)
  @primary_server = DRbServer.new(uri, front, config)
end
            
stop_service() click to toggle source

Stop the local dRuby server.

This operates on the primary server. If there is no primary server currently running, it is a noop.

 
               # File drb/drb.rb, line 1735
def stop_service
  @primary_server.stop_service if @primary_server
  @primary_server = nil
end
            
thread() click to toggle source

Get the thread of the primary server.

This returns nil if there is no primary server. See primary_server.

 
               # File drb/drb.rb, line 1803
def thread
  @primary_server ? @primary_server.thread : nil
end
            
to_id(obj) click to toggle source

Get a reference id for an object using the current server.

This raises a DRbServerNotFound error if there is no current server. See current_server.

 
               # File drb/drb.rb, line 1794
def to_id(obj)
  current_server.to_id(obj)
end
            
to_obj(ref) click to toggle source

Convert a reference into an object using the current server.

This raises a DRbServerNotFound error if there is no current server. See current_server.

 
               # File drb/drb.rb, line 1786
def to_obj(ref)
  current_server.to_obj(ref)
end
            
uri() click to toggle source

Get the URI defining the local dRuby space.

This is the URI of the current server. See current_server.

 
               # File drb/drb.rb, line 1744
def uri
  drb = Thread.current['DRb']
  client = (drb && drb['client'])
  if client
    uri = client.uri
    return uri if uri
  end
  current_server.uri
end